Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 B1S25 B30 Repol Engineering Plastics
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Repol Engineering Plastics/B1S25 B30 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 3.0 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 30 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Repol Engineering Plastics/B1S25 B30 |
|---|---|---|---|
| tensile strength | 断裂 | ISO 527-2/5 | 60.0 MPa |
| Tensile strain | 屈服 | ISO 527-2/5 | 3.0 % |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 3.0 kJ/m² |
| Tensile modulus | ISO 527-2 | 4500 MPa | |
| tensile strength | 断裂 | ISO 527-2 | 60.0 MPa |
| Tensile strain | 断裂 | ISO 527-2 | 20 % |
| 屈服 | ISO 527-2 | 3.0 % | |
| Flexural modulus | ISO 178 | 3500 MPa | |
| Tensile modulus | ISO 527-2/1 | 4500 MPa | |
| bending strength | ISO 178 | 100 MPa | |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eU | 30 kJ/m² |
| physical property | Test Condition | Test Method | Repol Engineering Plastics/B1S25 B30 |
|---|---|---|---|
| density | ISO 1183/A | 1.37 g/cm³ | |
| Humidity | ISO 15512/B | <0.25 % | |
| density | ISO 1183 | 1.37 g/cm³ |
| Thermal performance | Test Condition | Test Method | Repol Engineering Plastics/B1S25 B30 |
|---|---|---|---|
| vicat | ISO 306/B | >200 °C | |
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | ISO 75-2/A | 70.0 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 70.0 °C |
Contact Us
Get App
Top