Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 BT40Z EMS-CHEMIE SWITZERLAND
Grilon®
Engineering accessories、Power tools
Flame retardant、Antistatic
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/BT40Z |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23℃ 23°C | ISO 179/1eU | 无断裂 |
| Impact strength of simply supported beam gap | -30℃ -30°C | ISO 179/1eA | 10 kJ/m² |
| Impact strength of simply supported beam without notch | -30℃ -30°C | ISO 179/1eU | 无断裂 |
| Impact strength of simply supported beam gap | 23℃ 23°C | ISO 179/1eA | 15 kJ/m² |
| Mechanical performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/BT40Z |
|---|---|---|---|
| Ball pressure hardness | ISO 2039-1 | 120 Mpa | |
| Tensile modulus | ISO 527-2 | 2400 Mpa | |
| Tensile strain | 屈服 屈服 | ISO 527-2 | 6 % |
| Tensile strength | 屈服 Yield | ISO 527-2 | 70 Mpa |
| 断裂 Break | ISO 527-2 | 50 Mpa | |
| Nominal tensile fracture strain | ISO 527-2 | 15 % |
| Electrical performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/BT40Z |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 100000000000000 ohms·cm | |
| Dielectric strength | IEC 60243-1 | 37 KV/mm | |
| Surface Resistivity | IEC 60093 | -- ohms | |
| Compared to the leakage trace index | IEC 60112 | -- V |
| Physical performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/BT40Z |
|---|---|---|---|
| Shrinkage rate | MD Flow | ISO 294-4 | 0.7 % |
| Water absorption rate | 平衡，23℃，50% RH Equilibrium, 73°F, 50% RH | ISO 62 | 2.5 % |
| Density | ISO 1183 | 1.06 g/cm³ | |
| Water absorption rate | 饱和，23℃ Saturation, 73°F | ISO 62 | 6 % |
| Shrinkage rate | TD Across Flow | ISO 294-4 | 0.9 % |
| Flame retardant performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/BT40Z |
|---|---|---|---|
| Flammability level | 0.8 mm 0.8 mm | IEC 60695-11-10, -20 | HB |
| Thermal performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/BT40Z |
|---|---|---|---|
| Continuous use temperature | -- -- 4 4 | 内部方法 | 130 °C |
| Hot deformation temperature | 0.45 MPa，未退火 66 psi, Unannealed | ISO 75-2/B | 135 °C |
| Continuous use temperature | -- -- 3 3 | ISO 2578 | 80.0 到 100 °C |
| TD Transverse | ISO 11359-2 | 0.00010 1/℃ | |
| Hot deformation temperature | 1.8 MPa，未退火 264 psi, Unannealed | ISO 75-2/A | 105 °C |
| Melting temperature | ISO 11357-3 | 220 °C | |
| MD 流动 | ISO 11359-2 | 0.000070 1/℃ |
Contact Us
Get App
Top