Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM U10-01 JAPAN POLYPLASTIC
DURACON®
Household appliances,Food service sector
wear resistant
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/U10-01 |
|---|---|---|---|
| dielectric strength | 短时间实验：2mmt | ASTM D-149 | 24 MV/m |
| Volume resistivity | 3mmt | ASTM D-257 | 1×10 Ω.cm |
| ASTM D257/IEC 60093 | 1×10 Ω.cm |
| Mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/U10-01 |
|---|---|---|---|
| bending strength | ASTM D790/ISO 178 | 96 kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | ASTM D790/ISO 178 | 2380 kg/cm²(MPa)[Lb/in²] | |
| ASTM D-790 | 2380 Mpa | ||
| elongation | ASTM D638/ISO 527 | 45 % | |
| bending strength | ASTM D-790 | 96 Mpa | |
| elongation | ASTM D-638 | 45 % | |
| Impact strength of cantilever beam gap | 反缺口侧，带缺口 | ASTM D-256 | 760 J/m |
| Charpy Notched Impact Strength | ASTM D256/ISO 179 | 760 kg·cm/cm(J/M)ft·lb/in | |
| tensile strength | ASTM D-638 | 60 Mpa | |
| Impact strength of cantilever beam gap | 缺口侧，带缺口 | ASTM D-256 | 63 J/m |
| tensile strength | ASTM D638/ISO 527 | 60 kg/cm²(MPa)[Lb/in²] |
| Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/U10-01 |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.41 |
| Thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/U10-01 |
|---|---|---|---|
| Heat distortion temperature | HDT | ASTM D648/ISO 75 | 110 ℃（℉） |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 10 mm/mm.℃ | |
| Heat distortion temperature | 1.82Mpa，HDT | ASTM D-648 | 110 °C |
| UL flame retardant rating | UL 94 | HB | |
| Linear coefficient of thermal expansion | 室温 | 10 |
Contact Us
Get App
Top