Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM F10-52 MITSUBISHI ENGINEERING JAPAN
Iupital™
Electronic and Electrical Applications,Automotive sector
Weather resistance,Medium viscosity,High viscosity, no lubric
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Electrical performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/F10-52 |
|---|---|---|---|
| Dielectric loss | 10，正切 | ASTM D150 | 0.007 |
| Surface Resistivity | ASTM D257 | 1×10 | |
| dielectric strength | ASTM D149 | 19 MV/m | |
| dielectric constant | 10 | ASTM D150 | 33 Pf/m |
| Volume resistivity | ASTM D257 | 1×10 |
| Mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/F10-52 |
|---|---|---|---|
| Stretching length | ASTM D638 | 65 % | |
| Flexural modulus | ASTM D790 | 2.57 GPa | |
| Impact strength of cantilever beam gap | 3.2mm | ASTM D256 | 74 J/m |
| Rockwell hardness | ASTM D785 | 78 M | |
| bending strength | ASTM D790 | 88.3 Mpa | |
| tensile strength | ASTM D638 | 60.3 Mpa |
| physical property | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/F10-52 |
|---|---|---|---|
| Shrinkage rate | 平行方向 | 2.2 % | |
| Water absorption rate | ASTM D570 | 0.22 % | |
| melt mass-flow rate | ASTM D1238 | 2.5 g/10min |
| Thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/F10-52 |
|---|---|---|---|
| Heat distortion temperature | 455Kpa，HDT | ASTM D648 | 158 °C |
| 820Kpa，HDT | ASTM D648 | 110 °C | |
| UL flame retardant rating | UL 94 | HB |
Contact Us
Get App
Top