PA66 PX11313 WH9G331 PA66 vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Reference Price

PA66 SABIC INNOVATIVE US PX11313 WH9G331

US$ 5,430 / MT

FOB Guangzhou port, China

injection	Test Condition	Test Method	SABIC INNOVATIVE US/PX11313 WH9G331
Back pressure			0.200 to 0.300 Mpa
Temperature at the front of the material cylinder			270 to 290 °C
Screw speed			20 to 60 rpm
Mold temperature			85 to 100 °C
Processing (melt) temperature			270 to 295 °C
Suggested maximum moisture content			0.15 to 0.25 %
drying temperature			80 °C
Temperature in the middle of the barrel			270 to 290 °C
drying time			4.0 hr
Temperature at the rear of the barrel			260 to 275 °C
mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE US/PX11313 WH9G331
elongation	Break	ISO 527-2/5	1.3 %
Bending modulus	50.0 mm Span5	ASTM D790	12500 Mpa
bending strength	Yield, 50.0 mm Span5	ASTM D790	167 Mpa
bending strength		Break, 50.0 mm Span5	ASTM D790	176 Mpa
elongation	Break4	ASTM D638	1.3 %
tensile strength	Break	ISO 527-2/5	108 Mpa
bending strength	--6,7	ISO 178	186 Mpa
Tensile modulus	--3	ASTM D638	13300 Mpa
Tensile modulus		--	ISO 527-2/1	13300 Mpa
Bending modulus	--6	ISO 178	13000 Mpa
tensile strength	Break4	ASTM D638	98.0 Mpa
flammability	Test Condition	Test Method	SABIC INNOVATIVE US/PX11313 WH9G331
Hot filament ignition temperature	3.0 mm	IEC 60695-2-13	800 °C
UL flame retardant rating	0.8 mm	UL 94	V-0
Hot filament ignition temperature	1.0 mm	IEC 60695-2-13	750 °C
Burning wire flammability index	1.0 to 3.0 mm	IEC 60695-2-12	960 °C
Electrical performance	Test Condition	Test Method	SABIC INNOVATIVE US/PX11313 WH9G331
Surface resistivity		ASTM D257	> 1.0E+15 ohms
Dielectric strength	1.00 mm, in Oil	ASTM D149	> 10 KV/mm
High arc combustion index		UL 746	PLC 0
Hot wire ignition		UL 746	PLC 3
Dielectric constant	1.10 GHz	ASTM ES7-83	4.84
Dissipation factor	1.10 GHz	ASTM ES7-83	9.9E-3
thermal performance	Test Condition	Test Method	SABIC INNOVATIVE US/PX11313 WH9G331
Hot deformation temperature	0.45 MPa, Unannealed, 4.00 mm, 64.0 mm Span8	ISO 75-2/Bf	228 °C
thermal conductivity	--12	ISO 22007-2	1.9 W/m/K
thermal conductivity		--11	ISO 22007-2	0.90 W/m/K
Hot deformation temperature	1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span8	ISO 75-2/Af	208 °C
Hot deformation temperature		0.45 MPa, Unannealed, 3.20 mm	ASTM D648	227 °C
thermal conductivity	--9	ASTM E1461	1.4 W/m/K
Linear coefficient of thermal expansion	Flow : 40 to 120°C	ASTM E831	4.1E-5 cm/cm/°C
Hot deformation temperature	1.8 MPa, Unannealed, 6.40 mm	ASTM D648	215 °C
RTI Elec		UL 746	130 °C
RTI Imp		UL 746	105 °C
RTI		UL 746	120 °C
Linear coefficient of thermal expansion	Across Flow : 40 to 120°C	ASTM E831	8.5E-5 cm/cm/°C
thermal conductivity	--10	ASTM E1461	1.8 W/m/K
Ball Pressure Test	123 to 127°C	IEC 60695-10-2	通过
impact performance	Test Condition	Test Method	SABIC INNOVATIVE US/PX11313 WH9G331
Suspended wall beam without notch impact strength	23°C8	ISO 180/1U	23 kJ/m²
Suspended wall beam without notch impact strength		23°C	ASTM D4812	330 J/m
Physical properties	Test Condition	Test Method	SABIC INNOVATIVE US/PX11313 WH9G331
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.040 %
		24 hr, 23°C	ISO 62	0.040 %
		24 hr, 23°C2	ISO 62	0.23 %
Shrinkage rate	Across FlowFlow : 24hr	ASTM D955	0.58 %
Shrinkage rate		Flow : 24hr	ASTM D955	0.42 %

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index