Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 E55S3 EVONIK GERMANY
VESTAMID®
Automotive Applications、pipeline
Easy to process、Thermal stability、UV resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | EVONIK GERMANY/E55S3 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | NoBreak |
| 23°C | ISO 179/1eU | NoBreak |
| hardness | Test Condition | Test Method | EVONIK GERMANY/E55S3 |
|---|---|---|---|
| Shore hardness | 邵氏D | ISO 868 | 55 |
| Electrical performance | Test Condition | Test Method | EVONIK GERMANY/E55S3 |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 38 KV/mm | |
| Volume resistivity | IEC 60093 | 1E+11 ohms·cm | |
| relative permittivity | 23°C,1MHz | IEC 60250 | 4.30 |
| 23°C,100Hz | IEC 60250 | 9.50 | |
| Surface Resistivity | IEC 60093 | 1E+13 ohms | |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 0 |
| Dissipation Factor | 23°C,100Hz | IEC 60250 | 0.095 |
| 23°C,1MHz | IEC 60250 | 0.11 |
| Mechanical properties | Test Condition | Test Method | EVONIK GERMANY/E55S3 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 220 Mpa | |
| tensile strength | -- | ISO 527-2 | 38.0 Mpa |
| Tensile strain | 断裂 | ISO 527-2 | >200 % |
| Tensile creep modulus | 1000hr | ISO 899-1 | 100 Mpa |
| tensile strength | 50%应变 | ISO 527-2 | 17.0 Mpa |
| flammability | Test Condition | Test Method | EVONIK GERMANY/E55S3 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | EVONIK GERMANY/E55S3 |
|---|---|---|---|
| Shrinkage rate | TD | ISO 294-4 | 0.90-1.5 % |
| MD | ISO 294-4 | 0.60-1.1 % | |
| viscosity number | ISO 307 | 190 cm³/g | |
| Water absorption rate | 饱和,23°C | ISO 62 | 1.1 % |
| Thermal performance | Test Condition | Test Method | EVONIK GERMANY/E55S3 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD：23到55°C | ISO 11359-2 | 2E-04 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 90.0 °C |
| Linear coefficient of thermal expansion | TD：23to55°C | ISO 11359-2 | 2E-04 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 45.0 °C |
| vicat | -- | ISO 306/B | 100 °C |
| -- | ISO 306/A | 160 °C |
Contact Us
Get App
Top