Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

TPEE 1172LL TAIWAN CHANGCHUN
LONGLITE®
Cable,Fitness equipment
Creep resistance,antioxidant,Fatigue resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | TAIWAN CHANGCHUN/1172LL |
|---|---|---|---|
| tensile strength | ISO 527 | 37 Mpa |
| hardness | Test Condition | Test Method | TAIWAN CHANGCHUN/1172LL |
|---|---|---|---|
| Shore hardness | ISO 868 | 72 |
| Basic Performance | Test Condition | Test Method | TAIWAN CHANGCHUN/1172LL |
|---|---|---|---|
| Shore hardness | Shore D | ISO 868 | 72 |
| thermal performance | Test Condition | Test Method | TAIWAN CHANGCHUN/1172LL |
|---|---|---|---|
| Melting temperature | ISO 3146 | 218 °C | |
| ISO 3146C | 218 °C | ||
| melt mass-flow rate | 2.16kg at 230℃ | ISO 1133 | 9 g/10 min |
| mechanical properties | Test Condition | Test Method | TAIWAN CHANGCHUN/1172LL |
|---|---|---|---|
| Bending modulus | ISO 178 | 290 Mpa | |
| Charpy Notched Impact Strength | ISO 179/1eA | 14 kJ/m² | |
| Dielectric strength | IEC 60243 | 18 KV/mm | |
| Elongation at Break | ISO 527 | 360 % | |
| Flexural elasticity | ISO 178 | 500 Mpa | |
| Impact strength of cantilever beam gap | ISO 179/IeA | 14 kJ/㎡ | |
| Shore hardness | Shore D | ISO 868 | 72 |
| Tensile modulus | ISO 527-2 | 854 Mpa | |
| Tensile strain | Break | ISO 527-2 | 240 % |
| tensile strength | ISO 527 | 37 Mpa | |
| Yield | ISO 527-2 | 40.0 Mpa | |
| Volume resistivity | IEC 60093 | 8.0E 13 Ohm cm | |
| IEC 60093 | 9.0E 13 Ohm |
| Electrical performance | Test Condition | Test Method | TAIWAN CHANGCHUN/1172LL |
|---|---|---|---|
| Dielectric strength | 2.00 mm | IEC 60243-1 | 18 KV/mm |
| Surface resistivity | IEC 60093 | 9E+13 Ohm | |
| Volume resistivity | IEC 60093 | 1.3E+16 ohm·cm |
| Physical properties | Test Condition | Test Method | TAIWAN CHANGCHUN/1172LL |
|---|---|---|---|
| melt mass-flow rate | 230℃/2.16 kg | ISO 1133 | 30 g/10 min |
| Shrinkage rate | ISO 294-4 | 1.7 % | |
| Water absorption rate | 24hr | ISO 62 | 0.3 % |
| 23℃, 24 hr | ISO 62 | 0.30 % |