Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Homopolymer EMOPLEN® HP GFR 30 EMAS Plastik San.Tic.AS.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | EMAS Plastik San.Tic.AS./EMOPLEN® HP GFR 30 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/1A | >8.0 kJ/m² |
| hardness | Test Condition | Test Method | EMAS Plastik San.Tic.AS./EMOPLEN® HP GFR 30 |
|---|---|---|---|
| Shore hardness | 邵氏D | ISO 868 | 70to75 |
| Mechanical properties | Test Condition | Test Method | EMAS Plastik San.Tic.AS./EMOPLEN® HP GFR 30 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 6000to10000 MPa | |
| Tensile strain | 断裂 | ISO 527-2 | >4.0 % |
| tensile strength | 屈服 | ISO 527-2 | 60.0to100 MPa |
| physical property | Test Condition | Test Method | EMAS Plastik San.Tic.AS./EMOPLEN® HP GFR 30 |
|---|---|---|---|
| Shrinkage rate | 0.30to0.50 % | ||
| density | ISO 1183 | 1.10to1.15 g/cm³ | |
| melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 3.0to15 g/10min |
| Thermal performance | Test Condition | Test Method | EMAS Plastik San.Tic.AS./EMOPLEN® HP GFR 30 |
|---|---|---|---|
| vicat | ISO 306/B | 110 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 125 °C |
| melting temperature | ISO 3146 | 160 °C |
Contact Us
Get App
Top