Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Epoxy INSULCAST® 3230 LV/INSULCURE 9 ITW FORMEX
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | ITW FORMEX/INSULCAST® 3230 LV/INSULCURE 9 |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 90 |
| Mechanical properties | Test Condition | Test Method | ITW FORMEX/INSULCAST® 3230 LV/INSULCURE 9 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 1.0 % |
| tensile strength | ASTM D638 | 55.2 MPa | |
| compressive strength | ASTM D695 | 114 MPa | |
| bending strength | ASTM D790 | 89.6 MPa |
| Electrical performance | Test Condition | Test Method | ITW FORMEX/INSULCAST® 3230 LV/INSULCURE 9 |
|---|---|---|---|
| Dissipation Factor | 1kHz | ASTM D150 | 0.020 |
| Volume resistivity | ASTM D257 | 1.3E+16 ohms·cm | |
| dielectric strength | ASTM D149 | 19 kV/mm | |
| dielectric constant | 1kHz | ASTM D150 | 6.30 |
| Uncured Properties | Test Condition | Test Method | ITW FORMEX/INSULCAST® 3230 LV/INSULCURE 9 |
|---|---|---|---|
| Viscosity | 25°C2 | ASTM D2393 | 0.055 Pa·s |
| density | --2 | 0.968 g/cm³ | |
| --3 | 2.09 g/cm³ | ||
| Viscosity | --4 | ASTM D2393 | 6.0 Pa·s |
| 25°C3 | ASTM D2393 | 18 Pa·s | |
| Color | --2 | Amber | |
| Curing Time | 25°C | 16to24 hr | |
| Color | --3 | Black | |
| Curing Time | 储存稳定性5(25°C) | 75to120 min | |
| 65°C | 2.0 hr |
| thermosetting | Test Condition | Test Method | ITW FORMEX/INSULCAST® 3230 LV/INSULCURE 9 |
|---|---|---|---|
| Thermosetting components | 按重量计算的混合比 | 100 | |
| 硬化法 | 按重量计算的混合比:4.0到5.0 | ||
| 贮藏期限(25°C) | 52 wk |
| Thermal performance | Test Condition | Test Method | ITW FORMEX/INSULCAST® 3230 LV/INSULCURE 9 |
|---|---|---|---|
| Heat distortion temperature | HDT | 80 °C | |
| thermal conductivity | 1.3 W/m/K | ||
| Usage temperature | 105 °C | ||
| Linear coefficient of thermal expansion | MD | 2.8E-05 cm/cm/°C |
Contact Us
Get App
Top