Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 6G30FL AQUAFIL ITALY
--
--
enhance、Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Electrical performance | Test Condition | Test Method | AQUAFIL ITALY/6G30FL |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+15 ohm.cm | |
| Surface Resistivity | IEC 60093 | 1E+13 ohms |
| Mechanical properties | Test Condition | Test Method | AQUAFIL ITALY/6G30FL |
|---|---|---|---|
| Tensile strain | 断裂,23 ℃ | ISO 527-2/5 | 3.0 % |
| tensile strength | 断裂,23 ℃ | ISO 527-2/5 | 140 Mpa |
| Rockwell hardness | R 计秤 | ISO 2039-2 | 122 |
| Impact strength of cantilever beam gap | 23 ℃ | ISO 180/1A | 5.0 kJ/m² |
| Flexural modulus | 23 ℃ | ISO 178 | 5800 Mpa |
| Tensile modulus | 23 ℃ | ISO 527-2/1 | 8500 Mpa |
| physical property | Test Condition | Test Method | AQUAFIL ITALY/6G30FL |
|---|---|---|---|
| Shrinkage rate | 23 ℃ | ISO 2577 | 0.25-0.55 % |
| Water absorption rate | 饱和,23 ℃ | ISO 62 | 6.0 % |
| density | ISO 1183 | 1.36 g/cm³ |
| Thermal performance | Test Condition | Test Method | AQUAFIL ITALY/6G30FL |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 215 °C |
| Obstructive level | 0.800mm | UL 94 | HB |
| vicat | ISO 306/B50 | 210 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 205 °C |
| melting temperature | DSC | ISO 3146 | 220 °C |
Contact Us
Get App
Top