Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC PC 740/4 BL1435-07LD ALBIS PLASTIC GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodALBIS PLASTIC GmbH/ PC 740/4 BL1435-07LD
Impact strength of simply supported beam without notch-40°CISO 179/1eU无断裂
-20°CISO 179/1eU无断裂
Charpy Notched Impact Strength-20°CISO 179/1eA12 kJ/m²
--ISO 179/1eA12 kJ/m²
-40°CISO 179/1eA12 kJ/m²
Impact strength of simply supported beam without notch--ISO 179/1eU无断裂
Supplementary InformationTest ConditionTest MethodALBIS PLASTIC GmbH/ PC 740/4 BL1435-07LD
half-power angle1.00mm,T56.0 °
Mechanical propertiesTest ConditionTest MethodALBIS PLASTIC GmbH/ PC 740/4 BL1435-07LD
tensile strength --ISO 527-266.0 MPa
Tensile modulusISO 527-22400 MPa
Tensile strain断裂ISO 527-270 %
bending strength3.5%应变ISO 17876.0 MPa
Tensile strain屈服ISO 527-26.0 %
Bending StrainISO 1787.0 %
tensile strength 屈服ISO 527-266.0 MPa
bending strength--ISO 178100 MPa
Flexural modulusISO 1782450 MPa
optical performance Test ConditionTest MethodALBIS PLASTIC GmbH/ PC 740/4 BL1435-07LD
Haze ratio1000µmISO 1346895 %
transmissivity总计,1000µmISO 134681.0 %
flammabilityTest ConditionTest MethodALBIS PLASTIC GmbH/ PC 740/4 BL1435-07LD
Burning wire flammability index3.0mmIEC 60695-2-12850960 °C
UL flame retardant rating0.75mmUL 94V-2
1.00mmFMVSSpassed
Burning wire flammability index1.0mmIEC 60695-2-12850 °C
UL flame retardant rating1.5mmUL 94HB
Burning wire flammability index2.0mmIEC 60695-2-12850 °C
4.0mmIEC 60695-2-12850960 °C
physical property Test ConditionTest MethodALBIS PLASTIC GmbH/ PC 740/4 BL1435-07LD
Melt volume flow rate300°C/1.2kgISO 113317.0 cm³/10min
densityISO 11831.19 g/cm³
Thermal performanceTest ConditionTest MethodALBIS PLASTIC GmbH/ PC 740/4 BL1435-07LD
vicatISO 306/B50142 °C
Heat distortion temperature1.8MPa,未退火,HDTISO 75-2/A124 °C

Contact Us

Get App

Top