Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 SCL-4536（SCP36） SABIC INNOVATIVE US
LNP™ LUBRICOMP™
Electrical appliances、Plastic bag
lubrication、wear resistant、Filler: Carbon fiber rein、30% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/SCL-4536（SCP36） |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 34 kJ/m² |
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 10.0 J |
| Multi axis Instrumented Impact Energy | ISO 6603-2 | 2.00 J | |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 7.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/SCL-4536（SCP36） |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 18200 Mpa | |
| tensile strength | 断裂 | ISO 527-2/5 | 122 Mpa |
| elongation | 断裂 | ASTM D638 | 1.0 % |
| coefficient of friction | Static | ASTM D3702Modified | 0.33 |
| Flexural modulus | ISO 178 | 16000 Mpa | |
| bending strength | Break,50.0mmSpan | ASTM D790 | 178 Mpa |
| Tensile strain | 断裂 | ISO 527-2/5 | 1.0 % |
| Wear factor | Ring | ASTM D3702Modified | 0.00 10^-10in^5-min/ft-lb-hr |
| Washer | ASTM D3702Modified | 14.0 10^-10in^5-min/ft-lb-hr | |
| tensile strength | 断裂 | ASTM D638 | 1.00 Mpa |
| coefficient of friction | Dynamic | ASTM D3702Modified | 0.47 |
| Flexural modulus | 50.0mm跨距 | ASTM D790 | 16200 Mpa |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/SCL-4536（SCP36） |
|---|---|---|---|
| Shrinkage rate | MD：24小时 | ASTM D955 | 0.10 % |
| Water absorption rate | 24hr,50%RH | ASTM D570 | 0.16 % |
| 平衡,23°C,50%RH | ISO 62 | 0.24 % | |
| Shrinkage rate | TD：24hr | ASTM D955 | 0.50 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/SCL-4536（SCP36） |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,Unannealed,64.0mmSpan，HDT | ISO 75-2/Bf | 177 °C |
| Linear coefficient of thermal expansion | MD：-30到30°C | ASTM D696 | 3.2E-05 cm/cm/°C |
| TD：-30to30°C | ASTM D696 | 4.1E-05 cm/cm/°C | |
| Heat distortion temperature | 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 178 °C |
| 1.8MPa,未退火,64.0mm跨距，HDT | ISO 75-2/Af | 169 °C | |
| 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 173 °C |
Contact Us
Get App
Top