Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PUR-Ether/MDI MS-051 (HQEE) Covestro - Polycarbonates
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Covestro - Polycarbonates/ MS-051 (HQEE) |
|---|---|---|---|
| Shore hardness | ShoreA | ASTM D2240 | 93 |
| mechanical properties | Test Condition | Test Method | Covestro - Polycarbonates/ MS-051 (HQEE) |
|---|---|---|---|
| CompressionDeflection | 20% | ASTM D575 | 5.03 MPa |
| 10% | ASTM D575 | 2.90 MPa | |
| 50% | ASTM D575 | 18.4 MPa | |
| 2% | ASTM D575 | 0.621 MPa | |
| 5% | ASTM D575 | 1.69 MPa | |
| 25% | ASTM D575 | 6.21 MPa | |
| 15% | ASTM D575 | 3.96 MPa | |
| Taber abraser | 1000Cycles,1000g,H-18Wheel | ASTM D4066 | 34.0 mg |
| elastomer | Test Condition | Test Method | Covestro - Polycarbonates/ MS-051 (HQEE) |
|---|---|---|---|
| elongation | Break | ASTM D412 | 650 % |
| Permanent compression deformation | 70°C,22hr | ASTM D395 | 19 % |
| Shore hardness | ASTM D2632 | 54 % | |
| tear strength | Split | ASTM D1938 | 49 kN/m |
| --2 | ASTM D624 | 108 kN/m | |
| tensile strength | 300%Strain | ASTM D412 | 11.8 MPa |
| 200%Strain | ASTM D412 | 9.89 MPa | |
| 100%Strain | ASTM D412 | 8.07 MPa | |
| Break | ASTM D412 | 26.3 MPa |