Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 SLOVAMID® 6 GF 33 PLASTCOM SLOVAKIA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodPLASTCOM SLOVAKIA/SLOVAMID® 6 GF 33
Charpy Notched Impact Strength23°CISO 17915 kJ/m²
Impact strength of simply supported beam without notch-20°CISO 17975 kJ/m²
Charpy Notched Impact Strength-20°CISO 17914 kJ/m²
Impact strength of simply supported beam without notch23°CISO 17980 kJ/m²
Mechanical propertiesTest ConditionTest MethodPLASTCOM SLOVAKIA/SLOVAMID® 6 GF 33
Tensile modulusISO 527-210500 MPa
Tensile strain屈服ISO 527-22.0 %
tensile strength 屈服ISO 527-2180 MPa
Flexural modulusISO 1788650 MPa
bending strengthISO 178230 MPa
Electrical performanceTest ConditionTest MethodPLASTCOM SLOVAKIA/SLOVAMID® 6 GF 33
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 1
dielectric strengthIEC 60243-120 kV/mm
Volume resistivityIEC 600935E+13 ohms·cm
Surface ResistivityIEC 600938E+13 ohms
flammabilityTest ConditionTest MethodPLASTCOM SLOVAKIA/SLOVAMID® 6 GF 33
UL flame retardant ratingUL 94HB
Hot filament ignition temperatureIEC 60695-2-13650 °C
physical property Test ConditionTest MethodPLASTCOM SLOVAKIA/SLOVAMID® 6 GF 33
Shrinkage rateMDSTM6408080.55 %
densityISO 11831.37 g/cm³
water contentISO 9600.15 %
melt mass-flow rate230°C/2.16kgISO 11333.0 g/10min
Shrinkage rateTDSTM6408080.98 %
Thermal performanceTest ConditionTest MethodPLASTCOM SLOVAKIA/SLOVAMID® 6 GF 33
vicatISO 306/B215 °C
Heat distortion temperature0.45MPa,未退火，HDTISO 75-2/B225 °C
melting temperatureISO 3146220 °C

Contact Us

Get App

Top