Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS H802 901510 INEOS STYRO THAILAND
Novodur® 
Application in the automo、Automotive External Parts
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodINEOS STYRO THAILAND/H802 901510
Charpy Notched Impact Strength23°CISO 17915 kJ/m²
-30°CISO 1797.0 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 17980 kJ/m²
23°CISO 179100 kJ/m²
Mechanical propertiesTest ConditionTest MethodINEOS STYRO THAILAND/H802 901510
Tensile modulusISO 527-22700 Mpa
Tensile strain断裂,23°CISO 527-2>15 %
bending strengthISO 17880.0 Mpa
tensile strength 屈服,23°CISO 527-251.0 Mpa
Flexural modulusISO 1782700 Mpa
Tensile strain屈服,23°CISO 527-22.8 %
ball-indentation hardnessISO 2039-1115 Mpa
Electrical performanceTest ConditionTest MethodINEOS STYRO THAILAND/H802 901510
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 0
Volume resistivityIEC 60093>1.0E+15 ohms·cm
relative permittivity100HzIEC 602503.10
Dissipation Factor100HzIEC 602506E-03
dielectric strength1.50mmIEC 60243-134 KV/mm
relative permittivity1MHzIEC 602503.00
Surface ResistivityIEC 60093>1.0E+15 ohms
Dissipation Factor1MHzIEC 602500.010
physical property Test ConditionTest MethodINEOS STYRO THAILAND/H802 901510
Shrinkage rateISO 294-40.40-0.70 %
densityISO 11831.05 g/cm³
Melt volume flow rate220°C/10.0kgISO 11338.00 cm3/10min
Thermal performanceTest ConditionTest MethodINEOS STYRO THAILAND/H802 901510
Heat distortion temperature1.8MPa,退火，HDTISO 75-2/A101 °C
vicatISO 306/B50109 °C
Linear coefficient of thermal expansionMDISO 11359-28E-05 cm/cm/°C
Heat distortion temperature0.45MPa,Annealed，HDTISO 75-2/B107 °C

Contact Us

Get App

Top