Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPO/PA AG512 ASAHI JAPAN
XYRON™
--
Filler: Glass fiber reinf,20% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | ASAHI JAPAN/AG512 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 180 °C |
Linear coefficient of thermal expansion | MD:-30to65°C | ISO 11359-2 | 4E-05 cm/cm/°C |
mechanical properties | Test Condition | Test Method | ASAHI JAPAN/AG512 |
---|---|---|---|
Bending modulus | 23°C | ISO 178 | 5600 Mpa |
bending strength | 23°C | ISO 178 | 150 Mpa |
Tensile strain | Break,23°C | ISO 527-2 | 4.0 % |
tensile strength | Yield,23°C | ISO 527-2 | 140 Mpa |
Electrical performance | Test Condition | Test Method | ASAHI JAPAN/AG512 |
---|---|---|---|
Dielectric constant | 1MHz | IEC 60250 | 3.30 |
100Hz | IEC 60250 | 3.50 | |
Dielectric strength | 2.00mm | IEC 60243-1 | 38 KV/mm |
Dissipation factor | 1MHz | IEC 60250 | 0.012 |
100Hz | IEC 60250 | 8E-03 | |
Volume resistivity | 23°C | IEC 60093 | 7.1E+15 ohms·cm |
Physical properties | Test Condition | Test Method | ASAHI JAPAN/AG512 |
---|---|---|---|
Shrinkage rate | 3.00mm | Internal Method | 0.30-0.70 % |
impact performance | Test Condition | Test Method | ASAHI JAPAN/AG512 |
---|---|---|---|
Charpy Notched Impact Strength | 23°C | ISO 179 | 12 kJ/m² |