Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

LDPE LD2420H PCC IRAN
--
Food packaging,Foam,chip,film,Foam,Food packaging,Shrinkable film,General purpose
Low speed solidification ,Low speed solidification ,optical performance ,Good processability,No additives,General purpose
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | PCC IRAN/LD2420H |
---|---|---|---|
Melting temperature | ISO 11357-3 | 111 °C | |
Vicat softening temperature | ASTM D1525 | 93.0 °C |
mechanical properties | Test Condition | Test Method | PCC IRAN/LD2420H |
---|---|---|---|
Dart impact | 50 μm, Blown Film | ASTM D1709 | 90 g |
elongation | TD: Break, 50 μm, Blown Film | ISO 527-3 | 600 % |
MD: Break, 50 μm, Blown Film | ISO 527-3 | 250 % | |
Film thickness - tested | 50 µm | ||
Tensile modulus | Compression Molded | ISO 527-2 | 260 Mpa |
tensile strength | MD: Break, 50 μm, Blown Film | ISO 527-3 | 21.0 Mpa |
TD: Break, 50 μm, Blown Film | ISO 527-3 | 20.0 Mpa | |
Yield, Compression Molded | ISO 527-2 | 11.0 Mpa |
Physical properties | Test Condition | Test Method | PCC IRAN/LD2420H |
---|---|---|---|
melt mass-flow rate | 190℃/2.16 kg | ISO 1133 | 1.9 g/10 min |
optical performance | Test Condition | Test Method | PCC IRAN/LD2420H |
---|---|---|---|
gloss | 20°, 50.0 μm, Blown Film | ASTM D2457 | > 80 |
turbidity | 50.0 μm, Blown Film | ASTM D1003 | < 8.0 % |