Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS+PMMA Prime ABS Weather-X 100 Primex Plastics Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS Weather-X 100 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 22°C,3.18mm | ASTM D256 | 300 J/m |
| Supplementary Information | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS Weather-X 100 |
|---|---|---|---|
| PlugTemperature | 104to149 °C | ||
| Temperature | other | 43to85 °C | |
| Demoulding temperature | 93 °C | ||
| Surface Temperature | 149to199 °C |
| Mechanical properties | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS Weather-X 100 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 29 % |
| tensile strength | 断裂 | ASTM D638 | 41.0 MPa |
| Flexural modulus | ASTM D790 | 2000 MPa |
| physical property | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS Weather-X 100 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.30to0.50 % |
| density | ASTM D792 | 1.05 g/cm³ | |
| melt mass-flow rate | 230°C/10.0kg | ASTM D1238 | 6.5 g/10min |
| Thermal performance | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS Weather-X 100 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火,3.18mm，HDT | ASTM D648 | 94.4 °C |
| 1.8MPa,未退火,3.18mm，HDT | ASTM D648 | 85.0 °C |
Contact Us
Get App
Top