Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPE 340Z ASAHI JAPAN
XYRON™
Automotive interior parts,household electrical appliances
High temperature resistan,Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | ASAHI JAPAN/340Z |
---|---|---|---|
Hot deformation temperature | 1.8MPa,未退火 | ASTM D648 | 100 °C |
1.8MPa,未退火 | ISO 75-2/A | 94.0 °C | |
Linear coefficient of thermal expansion | MD:-30到65°C | ISO 11359-2 | 7.5E-05 cm/cm/°C |
mechanical properties | Test Condition | Test Method | ASAHI JAPAN/340Z |
---|---|---|---|
Bending modulus | 23°C | ISO 178 | 2390 Mpa |
bending strength | 23°C | ISO 178 | 88.0 Mpa |
Nominal tensile fracture strain | 23°C | ISO 527-2 | 13 % |
tensile strength | 屈服,23°C | ISO 527-2 | 54.0 Mpa |
Electrical performance | Test Condition | Test Method | ASAHI JAPAN/340Z |
---|---|---|---|
Dielectric constant | 1MHz | IEC 60250 | 2.90 |
100Hz | IEC 60250 | 2.90 | |
Dielectric strength | 2.00mm | IEC 60243-1 | 29 KV/mm |
Dissipation factor | 1MHz | IEC 60250 | 4E-03 |
100Hz | IEC 60250 | 3E-03 | |
Surface resistivity | IEC 60093 | 1E+16 ohms | |
Volume resistivity | 23°C | IEC 60093 | 1E+16 ohms·cm |
Physical properties | Test Condition | Test Method | ASAHI JAPAN/340Z |
---|---|---|---|
Shrinkage rate | 2.00mm | Internal Method | 0.50-0.70 % |
Water absorption rate | 23°C,24hr | ISO 62 | 0.10 % |
impact performance | Test Condition | Test Method | ASAHI JAPAN/340Z |
---|---|---|---|
Charpy Notched Impact Strength | 23°C | ISO 179 | 15 kJ/m² |
flammability | Test Condition | Test Method | ASAHI JAPAN/340Z |
---|---|---|---|
UL flame retardant rating | 0.75mm | UL 94 | V-0 |
2.5mm | UL 94 | 5VA |