Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Epoxy Ebalta AH 120 / TGL Ebalta Kunststoff GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta AH 120 / TGL |
---|---|---|---|
Impact strength of simply supported beam without notch | ISO 179 | 41to51 kJ/m² |
hardness | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta AH 120 / TGL |
---|---|---|---|
Shore hardness | 邵氏D | ISO 7619 | 84to88 |
Mechanical properties | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta AH 120 / TGL |
---|---|---|---|
compression stress | ISO 604 | 95.0to115 MPa | |
Flexural modulus | ISO 178 | 2900to3400 MPa | |
bending strength | ISO 178 | 110to130 MPa |
thermosetting | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta AH 120 / TGL |
---|---|---|---|
Thermosetting components | 按重量计算的混合比 | 100 | |
Post curing time | 90°C | 3.0to5.0 hr | |
60°C | 6.0to8.0 hr | ||
Thermosetting components | 硬化法 | 按重量计算的混合比:22 |
Uncured Properties | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta AH 120 / TGL |
---|---|---|---|
Viscosity | 25°C | 0.62to0.82 Pa·s | |
STORAGE STABILITY | 20°C | 35to40 min | |
density | 20°C | 1.10to1.14 g/cm³ | |
Curing Time | 20°C | 10to12 hr |
Thermal performance | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta AH 120 / TGL |
---|---|---|---|
Heat distortion temperature | 0.45MPa,未退火,HDT | ISO 75-2/B | 90.0to96.0 °C |
Contact Us
Get App
Top