Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PVC, Flexible EMVIN 731 NC Intergulf Empol
--
Wire and cable applications
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | Intergulf Empol/EMVIN 731 NC |
|---|---|---|---|
| Mass loss | 80°C | EN50363-3 | 0.800 mg/cm² |
| hardness | Test Condition | Test Method | Intergulf Empol/EMVIN 731 NC |
|---|---|---|---|
| Shore hardness | ShoreA | 80to84 |
| thermal performance | Test Condition | Test Method | Intergulf Empol/EMVIN 731 NC |
|---|---|---|---|
| Continuous use temperature | 70.0 °C |
| mechanical properties | Test Condition | Test Method | Intergulf Empol/EMVIN 731 NC |
|---|---|---|---|
| Tensile strain | Break,80°C2 | EN50363-3 | 260 % |
| Break | EN50363-3 | 280 % | |
| tensile strength | Yield | EN50363-3 | 15.2 MPa |
| Yield,80°C2 | EN50363-3 | 15.5 MPa |
| Electrical performance | Test Condition | Test Method | Intergulf Empol/EMVIN 731 NC |
|---|---|---|---|
| insulation resistance | 70°C | EN50363-3 | 0.500 Mohms/km |
| Physical properties | Test Condition | Test Method | Intergulf Empol/EMVIN 731 NC |
|---|---|---|---|
| density | 1.42to1.46 g/cm³ |
| aging | Test Condition | Test Method | Intergulf Empol/EMVIN 731 NC |
|---|---|---|---|
| Change rate of tensile strength in air | 80°C,168hr | EN50363-3 | 2.0 % |
| Change rate of ultimate elongation in air | 80°C,168hr | EN50363-3 | 7.1 % |