Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC S-3000UR 9001 MITSUBISHI THAILAND
IUPILON™
Automotive sector
high strength、Weather resistance、UV resistance、Low viscosity、Good weather resistance、Good demolding performanc、FDA certification
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Mechanical properties | Test Condition | Test Method | MITSUBISHI THAILAND/S-3000UR 9001 |
---|---|---|---|
Stretching length | ASTM D638 | 90-140 % | |
bending strength | ASTM 790 | 80.4-90.2 Mpa | |
Flexural modulus | ASTM D790 | 2.3 GPa | |
Impact strength of cantilever beam gap | ASTM D256 | 740-1000 J/m | |
tensile strength | ASTM D638 | 58.8-68.6 Mpa |
Electrical performance | Test Condition | Test Method | MITSUBISHI THAILAND/S-3000UR 9001 |
---|---|---|---|
Dielectric loss | 10,正切 | ASTM D150 | 0.0082 |
dielectric constant | 10 | ASTM D150 | 25.2 Pf/m |
dielectric strength | ASTM D149 | 18-22 KV/mm |
physical property | Test Condition | Test Method | MITSUBISHI THAILAND/S-3000UR 9001 |
---|---|---|---|
Shrinkage rate | 平行方向 | 0.5-0.8 % | |
Water absorption rate | 23℃,24hrs | ASTM D570 | 0.23-0.26 % |
Rockwell hardness | ASTM D785 | 123 R | |
Shrinkage rate | 垂直方向 | 0.5-0.8 % | |
melt mass-flow rate | 300℃,1.2kg | 11-14.5 g/10min |
Thermal performance | Test Condition | Test Method | MITSUBISHI THAILAND/S-3000UR 9001 |
---|---|---|---|
Heat distortion temperature | 18.6kgf/cm,HDT | ASTM D648 | 130-136 °C |
combustibility | UL 94 | HB | |
Heat distortion temperature | 4.6kgf/cm,HDT | ASTM D648 | 136-142 °C |
Linear coefficient of thermal expansion | 6-7 |
Contact Us
Get App
Top