Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO(PPE)+TPE NORYL™ WCD855 resin SABIC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | SABIC/NORYL™ WCD855 resin |
|---|---|---|---|
| Shore hardness | 邵氏A,30秒 | ASTM D2240 | 85 |
| Mechanical properties | Test Condition | Test Method | SABIC/NORYL™ WCD855 resin |
|---|---|---|---|
| fracture | ISO 527-2/50 | 16.0 MPa | |
| ISO 527-2/50 | 250 % | ||
| ASTM D638 | 260 % | ||
| ASTM D638 | 16.0 MPa | ||
| UL 1581 | 23.0 MPa | ||
| UL 1581 | 250 % |
| Electrical performance | Test Condition | Test Method | SABIC/NORYL™ WCD855 resin |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| Volume resistivity | ASTM D257 | 1.9E+16 ohms·cm | |
| Dissipation Factor | 1MHz | ASTM D150 | 7E-03 |
| dielectric constant | 1MHz | ASTM D150 | 2.40 |
| dielectric strength | 2.00mm,在油中 | IEC 60243-1 | 25 kV/mm |
| flammability | Test Condition | Test Method | SABIC/NORYL™ WCD855 resin |
|---|---|---|---|
| Smoke density | Non-Flame,0.5mmplaque,Ds,max | ASTME662 | 47 |
| VW | UL 1581 | Pass | |
| Hot filament ignition temperature | 3.00mm | IEC 60695-2-13 | 825 °C |
| Smoke density | Flame,0.5mmplaque,Ds,max | ASTME662 | 110 |
| Burning wire flammability index | 3.00mm | IEC 60695-2-12 | 850 °C |
| Limiting Oxygen Index | ISO 4589-2 | 27 % |
| physical property | Test Condition | Test Method | SABIC/NORYL™ WCD855 resin |
|---|---|---|---|
| density | ASTM D792 | 1.01 g/cm³ | |
| melt mass-flow rate | 250°C/10.0kg | ASTM D1238 | 16 g/10min |
| Thermal performance | Test Condition | Test Method | SABIC/NORYL™ WCD855 resin |
|---|---|---|---|
| Heat distortion temperature | 121°C | UL 1581 | 5.0 % |
| brittle temperature | ASTM D746 | <-40.0 °C |
Contact Us
Get App
Top