Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

TP, Unspecified E-4056-5 HAPCO USA
--
Electrical and electronic application fields, battery boxes, cable shields, switches
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | HAPCO USA/E-4056-5 |
|---|---|---|---|
| ThermalShockTest | Pass |
| hardness | Test Condition | Test Method | HAPCO USA/E-4056-5 |
|---|---|---|---|
| Shore hardness | ShoreA | ASTM D2240 | 50to60 |
| thermal performance | Test Condition | Test Method | HAPCO USA/E-4056-5 |
|---|---|---|---|
| thermal conductivity | 0.22 W/m/K | ||
| Usage temperature | 80 °C |
| mechanical properties | Test Condition | Test Method | HAPCO USA/E-4056-5 |
|---|---|---|---|
| elongation | Break | ASTM D638 | 950 % |
| tensile strength | ASTM D638 | 4.48 MPa |
| Electrical performance | Test Condition | Test Method | HAPCO USA/E-4056-5 |
|---|---|---|---|
| Dielectric constant | 1kHz | ASTM D150 | 4.70 |
| 100kHz | ASTM D150 | 4.60 | |
| Dielectric strength | ASTM D149 | 27 kV/mm | |
| Dissipation factor | 25°C,100kHz | ASTM D150 | 0.026 |
| Volume resistivity | ASTM D257 | 2.5E+08 ohms·cm |
| thermosetting | Test Condition | Test Method | HAPCO USA/E-4056-5 |
|---|---|---|---|
| GelTime | 25°C | ASTM D2971 | 5.0 min |
| stripping time | 21°C | 60to120 min | |
| Thermosetting components | PartA | 按重量计算的混合比:100.按容量计算的混合比:100 | |
| PartB | 按重量计算的混合比:400.按容量计算的混合比:400 | ||
| Thermosetting mixed viscosity | 25°C | ASTM D4878 | 4500 cP |
| Physical properties | Test Condition | Test Method | HAPCO USA/E-4056-5 |
|---|---|---|---|
| density | ASTM D4669 | 1.16 g/cm³ | |
| Shrinkage rate | MD | ASTM D2566 | 0.20to0.40 % |
| Weight Percubicinch | 19 g |
| impact performance | Test Condition | Test Method | HAPCO USA/E-4056-5 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 无断裂 |
| elastomer | Test Condition | Test Method | HAPCO USA/E-4056-5 |
|---|---|---|---|
| tear strength | ASTM D624 | 21.0 kN/m |