Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PAS RTP 1605 TFE 15 Z RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | RTP US/RTP 1605 TFE 15 Z |
---|---|---|---|
Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 64 J/m |
Suspended wall beam without notch impact strength | 3.18mm | ASTM D4812 | 530 J/m |
hardness | Test Condition | Test Method | RTP US/RTP 1605 TFE 15 Z |
---|---|---|---|
Rockwell hardness | R级 | ASTM D785 | 123 |
Mechanical properties | Test Condition | Test Method | RTP US/RTP 1605 TFE 15 Z |
---|---|---|---|
elongation | 断裂 | ASTM D638 | 1.0 % |
tensile strength | ASTM D638 | 117 MPa | |
Tensile modulus | ASTM D638 | 8960 MPa | |
Flexural modulus | ASTM D790 | 7580 MPa | |
bending strength | ASTM D790 | 172 MPa |
Electrical performance | Test Condition | Test Method | RTP US/RTP 1605 TFE 15 Z |
---|---|---|---|
Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
flammability | Test Condition | Test Method | RTP US/RTP 1605 TFE 15 Z |
---|---|---|---|
UL flame retardant rating | 1.6mm | UL 94 | V-0 |
physical property | Test Condition | Test Method | RTP US/RTP 1605 TFE 15 Z |
---|---|---|---|
Water absorption rate | 23°C,24hr | ASTM D570 | 0.36 % |
density | ASTM D792 | 1.69 g/cm³ | |
Shrinkage rate | MD:3.18mm | ASTM D955 | 0.10 % |
Thermal performance | Test Condition | Test Method | RTP US/RTP 1605 TFE 15 Z |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTM D648 | 213 °C |
0.45MPa,未退火,HDT | ASTM D648 | 221 °C |
Contact Us
Get App
Top