Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PET TechnoPet GF 20 2 0 TECHNOCOMPOUND GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoPet GF 20 2 0 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 8.0 kJ/m² |
| -30°C | ISO 179/1eA | 8.0 kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 25 kJ/m² |
| -30°C | ISO 179/1eU | 25 kJ/m² |
| hardness | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoPet GF 20 2 0 |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | 230 MPa |
| Electrical performance | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoPet GF 20 2 0 |
|---|---|---|---|
| Volume resistivity | IEC 60093 | >1.0E+16 ohms·cm | |
| relative permittivity | 100Hz | IEC 60250 | 4.60 |
| dielectric strength | 1.00mm | IEC 60243-1 | 31 kV/mm |
| relative permittivity | 1MHz | IEC 60250 | 4.10 |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 2 |
| Surface Resistivity | IEC 60093 | >1.0E+14 ohms |
| Mechanical properties | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoPet GF 20 2 0 |
|---|---|---|---|
| tensile strength | 断裂 | ISO 527-2/5 | 130 MPa |
| Tensile strain | 断裂 | ISO 527-2/5 | 2.0 % |
| Tensile modulus | ISO 527-2/1 | 8000 MPa |
| flammability | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoPet GF 20 2 0 |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 | HB |
| Burning wire flammability index | 2.0mm | IEC 60695-2-12 | 750 °C |
| physical property | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoPet GF 20 2 0 |
|---|---|---|---|
| Shrinkage rate | TD | ISO 2577 | 1.1 % |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.20 % |
| Shrinkage rate | MD | ISO 2577 | 0.30 % |
| Water absorption rate | 饱和,23°C | ISO 62 | 0.45 % |
| density | ISO 1183 | 1.51 g/cm³ | |
| Viscosity value | 降低的粘度 | ISO 1628 | 66.0 ml/g |
| Thermal performance | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoPet GF 20 2 0 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 240 °C | |
| vicat | ISO 306/B50 | 250 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 215 °C |
| Linear coefficient of thermal expansion | MD：23到80°C | ISO 11359-2 | 3E-05 cm/cm/°C |
| Heat distortion temperature | 8.0MPa,未退火，HDT | ISO 75-2/C | 75.0 °C |
Contact Us
Get App
Top