Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 A218 S30 SOLVAY FRANCE
TECHNYL®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SOLVAY FRANCE/A218 S30 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 25 kJ/m² |
| Mechanical properties | Test Condition | Test Method | SOLVAY FRANCE/A218 S30 |
|---|---|---|---|
| Tensile modulus | 23°C | ISO 527-2/1A | 4500 Mpa |
| Tensile strain | 断裂, 23°C | ISO 527-2 | 7.0 % |
| Tensile stress | 断裂, 23°C | ISO 527-2/1A | 80.0 Mpa |
| Flexural modulus | 23°C | ISO 178 | 3850 Mpa |
| Electrical performance | Test Condition | Test Method | SOLVAY FRANCE/A218 S30 |
|---|---|---|---|
| dielectric strength | 2.00 mm | IEC 60243-1 | 30 KV/mm |
| Dissipation Factor | IEC 60250 | 0.020 | |
| Volume resistivity | IEC 60093 | 5.0E+14 ohms·cm | |
| CTI | 解决方案 A | IEC 60112 | 400 V |
| Surface Resistivity | IEC 60093 | 5.0E+14 ohms |
| flammability | Test Condition | Test Method | SOLVAY FRANCE/A218 S30 |
|---|---|---|---|
| Limiting Oxygen Index | ISO 4589-2 | 25 % |
| physical property | Test Condition | Test Method | SOLVAY FRANCE/A218 S30 |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 1.6 % |
| 24 hr, 23°C | ISO 62 | 0.75 % | |
| Shrinkage rate | 流量 | ISO 294-4 | 1.1 % |
| 横向流量 | ISO 294-4 | 1.1 % |
| Thermal performance | Test Condition | Test Method | SOLVAY FRANCE/A218 S30 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 263 °C |
| injection | Test Condition | Test Method | SOLVAY FRANCE/A218 S30 |
|---|---|---|---|
| Temperature | 70 到 100 °C | ||
| Temperature at the rear of the barrel | 270 到 280 °C | ||
| drying temperature | 80 °C | ||
| Temperature at the front of the material cylinder | 280 到 290 °C | ||
| Suggested maximum moisture content | 0.20 % | ||
| Temperature in the middle of the barrel | 275 到 285 °C |
Contact Us
Get App
Top