Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPS 3130A1 JAPAN POLYPLASTIC
DURAFIDE® 
Fitness equipment、sporting goods
High impact resistance、Glass fiber reinforced
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/3130A1
ColorNumberHF2000/HD9100
hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/3130A1
Rockwell hardnessM级ISO 2039-2100
Basic performanceTest ConditionTest MethodJAPAN POLYPLASTIC/3130A1
Water absorption rate23℃,水中24小时ISO 620.02 %
melt viscosity310℃,1000/secISO 11443200 Pa·s
densityISO 11831.62 g/cm
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/3130A1
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 4
relative permittivity1kHzIEC 602507.60
Surface ResistivityASTM D257/IEC 600937.6 Ω
dielectric strength1MHzIEC 602500.096
1KHzIEC 602500.021
dielectric constant1MHzIEC 602506.4
dielectric strength3.00mmIEC 60243-19.0 KV/mm
dielectric constant1KHzIEC 602507.6
relative permittivity1MHzIEC 602506.40
Volume resistivityIEC 600939×10 Ω·cm
ASTM D257/IEC 600939 x 1015 Ω.cm
Dissipation Factor1MHzIEC 602500.10
Dielectric loss3mmtIEC 60243-19 KV/mm
Dissipation Factor1kHzIEC 602500.020
耐电弧性IEC 60250116 sec
Volume resistivityIEC 600939E+15 ohms·cm
Surface ResistivityIEC 600931×10 Ω
Leakage Tracking Index (CTI)IEC 60112150 V
Mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/3130A1
Flexural modulusASTM D790/ISO 17811.500 kg/cm²(MPa)[Lb/in²]
bending strengthISO 178230 Mpa
Flexural modulusISO 17811500 Mpa
Tensile strain断裂ISO 527-21.7 %
Charpy Notched Impact StrengthISO 179/1eA2.5 KJ/m
Tensile modulusASTM D638/ISO 527230 kg/cm²(MPa)[Lb/in²]
elongation at breakASTM D638/ISO 5271.7 %
tensile strength ASTM D638/ISO 527125 kg/cm²(MPa)[Lb/in²]
fracture strainISO 527-11.7 %
tensile strength ISO 527-1125 Mpa
ISO 527-2125 Mpa
otherTest ConditionTest MethodJAPAN POLYPLASTIC/3130A1
characteristic耐薬品性、耐熱水性、耐湿熱性
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/3130A1
densityASTM D792/ISO 11831.62
Water absorption rateASTM D570/ISO 620.04 %
flammabilityTest ConditionTest MethodJAPAN POLYPLASTIC/3130A1
UL flame retardant ratingUL 94V-0
physical property Test ConditionTest MethodJAPAN POLYPLASTIC/3130A1
Shrinkage rate流动方向，80℃×2mmt0.4 %
垂直方向，80℃×2mmt1.0 %
Water absorption rate23°C,24hrISO 620.040 %
melt viscosity310°C,1000sec^-1ISO 11443200000 mPa·s
Thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/3130A1
Linear coefficient of thermal expansionTD内部方法4E-05 cm/cm/°C
Heat distortion temperature1.8MPa，HDTISO 75-1210 °C
Linear coefficient of thermal expansion流动方向ISO 11359-22
Heat distortion temperature1.8MPa,未退火，HDTISO 75-2/A210 °C
Linear coefficient of thermal expansion垂直方向4
MD内部方法2E-05 cm/cm/°C
melting temperature210 ℃（℉）
Linear coefficient of thermal expansionASTM D696/ISO 113592 mm/mm.℃

Contact Us

Get App

Top