Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 B2F Pingdingshan Shenma
--
Automotive connectors and wiring terminals
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic Performance | Test Condition | Test Method | Pingdingshan Shenma/B2F |
|---|---|---|---|
| density | ISO 1183 | 1.15 | |
| Water absorption rate | 23℃Saturation | ISO 62 | 2.6-3.2 % |
| thermal performance | Test Condition | Test Method | Pingdingshan Shenma/B2F |
|---|---|---|---|
| Hot deformation temperature | 1.80MPa | ISO 75 | 70 ℃ |
| Linear coefficient of thermal expansion | ASTM E-831 | 6-10 10 | |
| Melting temperature | Dry | ISO 3146 | 220 ℃ |
| UL flame retardant rating | UL 04 | V-0 |
| mechanical properties | Test Condition | Test Method | Pingdingshan Shenma/B2F |
|---|---|---|---|
| bending strength | Dry,23℃ | ISO 178 | 110 MPa |
| Charpy Notched Impact Strength | Dry,23℃ | ISO 179/1eA | 9 KJ/m |
| Elongation at Break | Dry,23℃ | ISO 527 | 5 % |
| Impact strength of cantilever beam gap | Dry,23℃ | ISO 180/1A | 4.5 KJ/m |
| Impact strength of simply supported beam without notch | Dry,23℃ | ISO 179/1eU | 110 KJ/m |
| Tensile modulus | Dry,23℃ | ISO 527 | 3400 MPa |
| tensile strength | Dry,23℃ | ISO 527 | 85 MPa |
| Electrical performance | Test Condition | Test Method | Pingdingshan Shenma/B2F |
|---|---|---|---|
| Dielectric strength | Dry,23℃ | IEC 243 | 24 KV/mm |
| Volume resistivity | Dry,23℃ | IEC 93 | 10 Ω.cm |