Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 K224-G6 BK DSM HOLAND
Akulon®
wheel,furniture,Shell,power,Tool products,Insulation material
Glass fiber reinforced
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | DSM HOLAND/K224-G6 BK |
---|---|---|---|
Hot deformation temperature | 1.8Mpa | ISO 75-2 | 210 ℃ |
0.45Mpa | ISO 75-2 | 220 ℃ | |
UL flame retardant rating | UL94 | HB |
mechanical properties | Test Condition | Test Method | DSM HOLAND/K224-G6 BK |
---|---|---|---|
Fracture strain | 5mm/min | ISO 527-1 | 3.5 % |
Fracture stress | 5mm/min | ISO 527-1 | 180 MPa |
Impact strength of cantilever beam gap | 23℃ | ISO 180/1A | 14 kJ/m² |
Tensile modulus | 1mm/min | ISO 527-1 | 10000 MPa |
Electrical performance | Test Condition | Test Method | DSM HOLAND/K224-G6 BK |
---|---|---|---|
Dielectric constant | 50Hz | IEC 250 | 3.5 |
1MHz | IEC 250 | 3.3 | |
Dielectric loss | 50Hz | IEC 250 | E-4 |
1MHz | IEC 250 | 150 E-4 | |
Surface resistivity | IEC 93 | 1E+15 Ohm | |
Volume resistivity | IEC 93 | 1E+15 Ohm.cm |
Physical properties | Test Condition | Test Method | DSM HOLAND/K224-G6 BK |
---|---|---|---|
density | ISO 1183 | 1.35 g/cm³ | |
Water absorption rate | 23℃,50%相对湿度 | ISO 62 | 1.9 % |