Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PS SOLARENE G116 Korea Dongbu
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Korea Dongbu/SOLARENE G116 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 22 J/m |
| hardness | Test Condition | Test Method | Korea Dongbu/SOLARENE G116 |
|---|---|---|---|
| Rockwell hardness | L计秤 | ASTM D785 | 101 |
| Mechanical properties | Test Condition | Test Method | Korea Dongbu/SOLARENE G116 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 3.0 % |
| tensile strength | ASTM D638 | 55.9 MPa | |
| Flexural modulus | ASTM D790 | 3240 MPa | |
| bending strength | ASTM D790 | 105 MPa |
| Electrical performance | Test Condition | Test Method | Korea Dongbu/SOLARENE G116 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+17 ohms·cm | |
| arc resistance | 1.59mm | ASTM D495 | PLC7 |
| Hot wire ignition (HWI) | 1.6mm | UL 746 | PLC 3 |
| High Voltage Arc Traceability Rate (HVTR) | 1.59mm | UL 746 | PLC 1 |
| High arc combustion index (HAI) | 1.6mm | UL 746 | PLC 4 |
| Compared to the Leakage Tracking Index (CTI) | 1.59mm | UL 746 | PLC 1 |
| Hot wire ignition (HWI) | 3.2mm | UL 746 | PLC 3 |
| dielectric constant | 1MHz | ASTM D150 | 2.60 |
| arc resistance | 3.17mm | ASTM D495 | PLC7 |
| High Voltage Arc Traceability Rate (HVTR) | 3.17mm | UL 746 | PLC 1 |
| Compared to the Leakage Tracking Index (CTI) | 3.17mm | UL 746 | PLC 1 |
| High arc combustion index (HAI) | 3.2mm | UL 746 | PLC 3 |
| flammability | Test Condition | Test Method | Korea Dongbu/SOLARENE G116 |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | HB |
| 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Korea Dongbu/SOLARENE G116 |
|---|---|---|---|
| melt mass-flow rate | 200°C/5.0kg | ASTM D1238 | 2.3 g/10min |
| Shrinkage rate | MD | ASTM D955 | 0.40to0.70 % |
| Water absorption rate | 24hr | ASTM D570 | 0.030 % |
| density | ASTM D792 | 1.04 g/cm³ |
| Thermal performance | Test Condition | Test Method | Korea Dongbu/SOLARENE G116 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,6.40mm，HDT | ASTM D648 | 87.0 °C |
| RTI | 3.2mm | UL 746 | 50.0 °C |
| RTI Imp | 3.2mm | UL 746 | 50.0 °C |
| vicat | -- | ASTM D15251 | 105 °C |
| -- | ASTM D15252 | 100 °C | |
| RTI Imp | 1.6mm | UL 746 | 50.0 °C |
| RTI Elec | 3.2mm | UL 746 | 50.0 °C |
| 1.6mm | UL 746 | 50.0 °C | |
| RTI | 1.6mm | UL 746 | 50.0 °C |
Contact Us
Get App
Top