Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 AG33 宁波德立隆
--
高强度,耐热,耐磨
散热器水室,轴承保持架,车轮罩,发动机罩,渔线轮,汽车配件,电子电路配件,机械零件等
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | 宁波德立隆/AG33 |
|---|---|---|---|
| Tensile strength at break | IS0527 | 175 Mpa | |
| Charpy Notched Impact Strength | ISO 179/1eA | 11 kJ/m² | |
| Rockwell hardness | R标尺 | 119 | |
| bending strength | IS0178 | 733 Mpa | |
| Simple support without notch impact strength | ISO 179/1eU | 48 kJ/m² | |
| Flexural modulus | IS0 178 | 7800 Mpa | |
| elongation at break | IS0 527 | 2.2 |
| other | Test Condition | Test Method | 宁波德立隆/AG33 |
|---|---|---|---|
| Surface Resistivity | ISO 167 | 10¹² Ohm | |
| Linear forming shrinkage rate | ISO2577 | 0.002-0.006 mm/mm | |
| dielectric strength | IEC 1183 | 20 KV/mm | |
| filler | GF30 % |
| Injection molding | Test Condition | Test Method | 宁波德立隆/AG33 |
|---|---|---|---|
| Injection molding temperature range | 260-285 °C | ||
| Drying temperature/time | 90/6-10 °C/hr |
| Flame retardant performance | Test Condition | Test Method | 宁波德立隆/AG33 |
|---|---|---|---|
| Flame retardant grade | UL94 | HB |
| physical property | Test Condition | Test Method | 宁波德立隆/AG33 |
|---|---|---|---|
| Water absorption rate | 24hr，23°℃ | IS0 62 | 0.8 % |
| density | ISO 1183 | 1.38 g/cm³ |
| Thermal performance | Test Condition | Test Method | 宁波德立隆/AG33 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa | IS075 | 250 ℃ |
| 1.82MPa | IS0 75 | 235 ℃ |
Contact Us
Get App
Top