Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC DFL22 SABIC INNOVATIVE US
LNP™ LUBRICOMP™ 
Electronic and Electrical Applications,Lighting applications
Easy to form,Easy to demould
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodSABIC INNOVATIVE US/DFL22
Hot deformation temperature0.45MPa,Unannealed,64.0mmSpanISO 75-2/Bf146 °C
1.8MPa,未退火,3.20mmASTM D648140 °C
1.8MPa,未退火,64.0mm跨距ISO 75-2/Af140 °C
0.45MPa,未退火,3.20mmASTM D648145 °C
Linear coefficient of thermal expansionTD：-40到40°CASTME8315.6E-05 cm/cm/°C
TD：-40到40°CISO 11359-25.6E-05 cm/cm/°C
MD：-40到40°CISO 11359-25.6E-05 cm/cm/°C
MD：-40到40°CASTME8315.6E-05 cm/cm/°C
mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE US/DFL22
Bending modulusASTM D7904140 Mpa
ISO 1783900 Mpa
bending strengthISO 178118 Mpa
elongation断裂ASTM D6385.5 %
屈服ASTM D6383.3 %
Friction coefficientDynamicASTM D3702Modified0.38
StaticASTM D3702Modified0.44
Tensile modulusASTM D6384140 Mpa
ISO 527-2/14150 Mpa
Tensile strain屈服ISO 527-23.3 %
断裂ISO 527-25.8 %
tensile strength屈服ASTM D63871.7 Mpa
屈服ISO 527-271.0 Mpa
断裂ASTM D63867.6 Mpa
断裂ISO 527-267.0 Mpa
Wear factorWasherASTM D3702Modified166 10^-10in^5-min/ft-lb-hr
Physical propertiesTest ConditionTest MethodSABIC INNOVATIVE US/DFL22
Shrinkage rateTD：24hrASTM D9550.60-0.80 %
TD:24小时ISO 294-40.65 %
MD：24小时ASTM D9550.40-0.60 %
MD:24小时ISO 294-40.50 %
Water absorption rate24hr,50%RHASTM D5700.10 %
impact performanceTest ConditionTest MethodSABIC INNOVATIVE US/DFL22
Dart impact23°C,EnergyatPeakLoadASTM D376323.2 J
Impact strength of cantilever beam gap23°CISO 180/1A13 kJ/m²
Multi axis Instrumented Impact EnergyISO 6603-26.80 J
Suspended wall beam without notch impact strength23°CISO 180/1U49 kJ/m²

Contact Us

Get App

Top