Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPO(PPE) UNINOR® Rg-30 Nytef Plastics, Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Nytef Plastics, Ltd./UNINOR® Rg-30 |
|---|---|---|---|
| Rockwell hardness | L-Sale | ASTM D785 | 108 |
| thermal performance | Test Condition | Test Method | Nytef Plastics, Ltd./UNINOR® Rg-30 |
|---|---|---|---|
| Continuous use temperature | UL 746 | 110 °C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 138 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 2.5E-05 cm/cm/°C |
| Melting temperature | ASTM D3418 | 254 °C |
| mechanical properties | Test Condition | Test Method | Nytef Plastics, Ltd./UNINOR® Rg-30 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 7170 MPa | |
| bending strength | ASTM D790 | 162 MPa | |
| elongation | Break | ASTM D638 | 5.0 % |
| tensile strength | Yield | ASTM D638 | 103 MPa |
| Electrical performance | Test Condition | Test Method | Nytef Plastics, Ltd./UNINOR® Rg-30 |
|---|---|---|---|
| Dielectric constant | 60Hz | ASTM D150 | 2.93 |
| Dielectric strength | ASTM D149 | 22 kV/mm | |
| Dissipation factor | 60Hz | ASTM D150 | 9E-04 |
| Volume resistivity | ASTM D257 | >1.0E+16 ohms·cm |
| Physical properties | Test Condition | Test Method | Nytef Plastics, Ltd./UNINOR® Rg-30 |
|---|---|---|---|
| density | ASTM D792 | 1.28 g/cm³ | |
| Water absorption rate | 24hr | ASTM D570 | 0.060 % |
| impact performance | Test Condition | Test Method | Nytef Plastics, Ltd./UNINOR® Rg-30 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 120 J/m |
| flammability | Test Condition | Test Method | Nytef Plastics, Ltd./UNINOR® Rg-30 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |