Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+Polyester Panlite® AM-9730FZ TEIJIN JAPAN
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TEIJIN JAPAN/Panlite® AM-9730FZ |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 35 kJ/m² |
| -30°C | ISO 179 | 12 kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | NoBreak |
| Mechanical properties | Test Condition | Test Method | TEIJIN JAPAN/Panlite® AM-9730FZ |
|---|---|---|---|
| Flexural modulus | ISO 178 | 3300 MPa | |
| Tensile strain | 断裂 | ISO 527-2/50 | 100 % |
| Tensile modulus | ISO 527-2/1 | 3500 MPa | |
| Tensile strain | 屈服 | ISO 527-2/50 | 4.0 % |
| bending strength | ISO 178 | 90.0 MPa | |
| tensile strength | 屈服 | ISO 527-2/50 | 60.0 MPa |
| 断裂 | ISO 527-2/50 | 50.0 MPa |
| Electrical performance | Test Condition | Test Method | TEIJIN JAPAN/Panlite® AM-9730FZ |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms |
| physical property | Test Condition | Test Method | TEIJIN JAPAN/Panlite® AM-9730FZ |
|---|---|---|---|
| Melt volume flow rate | 280°C/2.16kg | ISO 1133 | 9.00 cm³/10min |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.18 % |
| density | ISO 1183 | 1.29 g/cm³ | |
| Shrinkage rate | MD:4.00mm | 内部方法 | 0.40to0.60 % |
| TD:4.00mm | 内部方法 | 0.50to0.70 % |
| Thermal performance | Test Condition | Test Method | TEIJIN JAPAN/Panlite® AM-9730FZ |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 132 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 105 °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 5E-05 cm/cm/°C |
| TD | ISO 11359-2 | 7E-05 cm/cm/°C |
Contact Us
Get App
Top