Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 943A-116 SABIC INNOVATIVE CHONGQING
LEXAN™
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE CHONGQING/943A-116 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 75 kJ/m² |
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 50.0 J |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | NoBreak |
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 60 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | NoBreak |
| Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 50 kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | NoBreak |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 70 kJ/m² |
| Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | NoBreak |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE CHONGQING/943A-116 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 2100 Mpa | |
| elongation | 屈服 | ASTM D638 | 6.0 % |
| tensile strength | 断裂 | ASTM D638 | 60.0 Mpa |
| Tensile strain | 屈服 | ISO 527-2/50 | 6.0 % |
| tensile strength | 断裂 | ISO 527-2/50 | 60.0 Mpa |
| Flexural modulus | 50.0mm跨距 | ASTM D790 | 2060 Mpa |
| tensile strength | 屈服 | ISO 527-2/50 | 55.0 Mpa |
| Tensile modulus | ASTM D638 | 2100 Mpa | |
| elongation | 断裂 | ASTM D638 | 130 % |
| bending strength | 屈服,50.0mm跨距 | ASTM D790 | 89.0 Mpa |
| ISO 178 | 85.0 Mpa | ||
| Flexural modulus | ISO 178 | 2200 Mpa | |
| tensile strength | 屈服 | ASTM D638 | 58.0 Mpa |
| Tensile strain | 断裂 | ISO 527-2/50 | 130 % |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE CHONGQING/943A-116 |
|---|---|---|---|
| Dissipation Factor | 50Hz | ASTM D150 | 2.4E-03 |
| 60Hz | ASTM D150 | 2.4E-03 | |
| dielectric constant | 60Hz | ASTM D150 | 2.95 |
| 50Hz | ASTM D150 | 2.95 | |
| dielectric strength | 3.20mm,inOil | ASTM D149 | 17 KV/mm |
| Dissipation Factor | 1MHz | ASTM D150 | 8.5E-03 |
| High arc combustion index (HAI) | HAI | UL 746 | PLC 0 |
| Hot wire ignition (HWI) | HWI | UL 746 | PLC 1 |
| dielectric constant | 1MHz | ASTM D150 | 2.90 |
| dielectric strength | 3.20mm,在油中 | IEC 60243-1 | 16 KV/mm |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 3 |
| IEC 60112 | V |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE CHONGQING/943A-116 |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | 5VA |
| Hot filament ignition temperature | 1.0mm | IEC 60695-2-13 | 825 °C |
| Burning wire flammability index | 1.0mm | IEC 60695-2-12 | 960 °C |
| UL flame retardant rating | 1.5mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE CHONGQING/943A-116 |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.40-0.80 % |
| Melt volume flow rate | 300°C/1.2kg | ISO 1133 | 9.00 cm3/10min |
| Shrinkage rate | TD：3.20mm | 内部方法 | 0.40-0.80 % |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.15 % |
| 饱和,23°C | ISO 62 | 0.35 % | |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 10 g/10min |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE CHONGQING/943A-116 |
|---|---|---|---|
| Linear coefficient of thermal expansion | TD：-40到40°C | ASTME831 | 6.5E-05 cm/cm/°C |
| vicat | ISO 306/B120 | 140 °C | |
| Heat distortion temperature | 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 135 °C |
| Linear coefficient of thermal expansion | MD：-40到40°C | ASTME831 | 6.5E-05 cm/cm/°C |
| MD：23到80°C | ISO 11359-2 | 7.2E-05 cm/cm/°C | |
| RTI Imp | UL 746 | 115 °C | |
| RTI Str | UL 746 | 120 °C | |
| Heat distortion temperature | 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 120 °C |
| Linear coefficient of thermal expansion | TD：23to80°C | ISO 11359-2 | 7.7E-05 cm/cm/°C |
| vicat | ASTM D15259 | 140 °C | |
| ball-indentation hardness | 125°C | IEC 60695-10-2 | Pass |
| RTI Elec | UL 746 | 125 °C |
Contact Us
Get App
Top