PC/ABS FR110 013693 PC/ABS vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Reference Price

PC/ABS COVESTRO THAILAND FR110 013693

Injection grade

US$ 3,640 / MT

FOB Shenzhen Port

Electrical performance	Test Condition	Test Method	COVESTRO THAILAND/FR110 013693
Dielectric strength		IEC 243-1	30 KV/mm
Volume resistivity		IEC 93	1E+15 Ω.m
Dielectric constant	100HZ	IEC 250	3.2
Dielectric constant		1MHZ	IEC 250	3.1
Dissipation factor	100HZ	IEC 250	30 0.0001
Compared to the Leakage Traceability Index (CTI)	溶液A	IEC 112	500 等级
Surface resistivity		IEC 93	1E+14 Ω
Dissipation factor	1MHZ	IEC 250	80 0.0001
machinability	Test Condition	Test Method	COVESTRO THAILAND/FR110 013693
Injection speed		ISO 294	240 mm/s
Melt Temperature		ISO 294	240 °C
Mold temperature		ISO 294	80 °C
thermal performance	Test Condition	Test Method	COVESTRO THAILAND/FR110 013693
Hot deformation temperature	1.80MPa	ISO 75	90 °C
Linear coefficient of thermal expansion	垂直Flow，23至55℃	ASTM E 831	0.80 10
Vicat softening temperature	50N;50K/h	ISO 306	108 °C
Hot deformation temperature	0.45MPa	ISO 75	100 °C
Linear coefficient of thermal expansion	Flow，23至55℃	ASTM E 831	0.76 10
mechanical properties	Test Condition	Test Method	COVESTRO THAILAND/FR110 013693
Impact strength of cantilever beam gap	-30℃	ISO 180-1A	15 KJ/m
tensile strength	50mm/min	ISO 527	50 Mpa
Elongation at Break	50mm/min	ISO 527	>50 %
Impact strength of cantilever beam gap	23℃	ISO 180-1A	50 KJ/m
Tensile strain	50mm/min，Yield	ISO 527	4 %
Impact strength of cantilever beam gap	23℃	ISO 180-1U	N KJ/m
Tensile stress	50mm/min，Yield	ISO 527	60 Mpa
Tensile modulus	1mm/min	ISO 527	2600 Mpa
Other performance	Test Condition	Test Method	COVESTRO THAILAND/FR110 013693
Water absorption rate	23℃Saturation吸水	ISO 62	0.5 %
Water absorption rate		23℃/50%相对湿度	ISO 62	0.2 %
Basic Performance	Test Condition	Test Method	COVESTRO THAILAND/FR110 013693
density		ISO 1183	1190 kg/m
Physical properties	Test Condition	Test Method	COVESTRO THAILAND/FR110 013693
Shrinkage rate	Flow，500bar	ISO 2577	0.4-0.6 %
melt mass-flow rate	240℃	ISO 1133	20 CM
Spiral flow length	260℃，2×8.7mm		380 mm
Shrinkage rate	垂直Flow，500bar	ISO 2577	0.4-0.6 %

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index