plas
Log In
CategoriesAll

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 NILAMID® A3 GF30 TM2 Celanese Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodCelanese Corporation/NILAMID® A3 GF30 TM2
Ball Pressure Test125°CIEC 60695-10-2通过
165°CIEC 60695-10-2通过
Continuous use temperatureIEC 60216110 °C
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B260 °C
1.8MPa,UnannealedISO 75-2/A254 °C
mechanical propertiesTest ConditionTest MethodCelanese Corporation/NILAMID® A3 GF30 TM2
Tensile modulus23°CISO 527-28500 MPa
Tensile strainBreak,23°CISO 527-23.0 %
tensile strengthYield,23°CISO 527-2135 MPa
Electrical performanceTest ConditionTest MethodCelanese Corporation/NILAMID® A3 GF30 TM2
Compared to the anti leakage trace index3.20mm,SolutionAIEC 60112PLC 1
Dielectric strength2.00mmIEC 60243-121 kV/mm
Surface resistivityIEC 600931E+13 ohms
Volume resistivity23°CIEC 600931E+15 ohms·cm
Physical propertiesTest ConditionTest MethodCelanese Corporation/NILAMID® A3 GF30 TM2
density23°CISO 11831.37 g/cm³
Shrinkage rateTD:23°CISO 294-40.80 %
MD:23°CISO 294-40.30 %
Water absorption rateSaturation,23°CISO 625.0 %
23°C,24hrISO 620.60 %
impact performanceTest ConditionTest MethodCelanese Corporation/NILAMID® A3 GF30 TM2
Charpy Notched Impact Strength23°CISO 179/1eA6.5 kJ/m²
-30°CISO 179/1eA5.5 kJ/m²
Impact strength of cantilever beam gap-30°CISO 180/A6.0 kJ/m²
23°CISO 180/A8.0 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eU28 kJ/m²
23°CISO 179/1eU35 kJ/m²
flammabilityTest ConditionTest MethodCelanese Corporation/NILAMID® A3 GF30 TM2
Burning wire flammability index0.8mmIEC 60695-2-12650 °C
3.2mmIEC 60695-2-12650 °C
Extreme Oxygen IndexISO 4589-227 %
UL flame retardant rating3.2mmUL 94HB
0.8mmUL 94HB
1.6mmUL 94HB

Contact Us

Get App

Top