Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPA HTN51G15HSL DUPONT USA
Zytel®
Electric wire、Cable
enhance、Glass fiber reinforced、Weather resistance、Thermal stability、Low temperature resistanc、High temperature resistan、Filler: Glass fiber reinf、15% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DUPONT USA/HTN51G15HSL |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 6.0 kJ/m² |
| -30°C | ISO 179/1eA | 6.0 kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 25 kJ/m² |
| -30°C2 | ISO 179/1eU | 20 kJ/m² | |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 6.0 kJ/m² |
| -40°C | ISO 180/1A | 6.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | DUPONT USA/HTN51G15HSL |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 6500 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 2.1 % |
| Flexural modulus | ISO 178 | 5700 Mpa | |
| tensile strength | 断裂 | ISO 527-2 | 120 Mpa |
| Electrical performance | Test Condition | Test Method | DUPONT USA/HTN51G15HSL |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
| Surface Resistivity | IEC 60093 | -- ohms |
| flammability | Test Condition | Test Method | DUPONT USA/HTN51G15HSL |
|---|---|---|---|
| UL flame retardant rating | 0.75mm | UL 94 | HB |
| 0.75mm | IEC 60695-11-10,-20 | HB | |
| 1.5mm | IEC 60695-11-10,-20 | HB | |
| FMVSS flammability | FMVSS302 | B | |
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| Limiting Oxygen Index | ISO 4589-2 | 23 % | |
| burning rate | 1.00mm | ISO 3795 | <100 mm/min |
| physical property | Test Condition | Test Method | DUPONT USA/HTN51G15HSL |
|---|---|---|---|
| Shrinkage rate | TD | ISO 294-4 | 0.70 % |
| MD | ISO 294-4 | 0.40 % | |
| density | ISO 1183 | 1.30 g/cm³ |
| Thermal performance | Test Condition | Test Method | DUPONT USA/HTN51G15HSL |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 300 °C | |
| Linear coefficient of thermal expansion | TD：-- | ISO 11359-2 | 6.4E-05 cm/cm/°C |
| MD：-40to23°C | ISO 11359-2 | 5.7E-05 cm/cm/°C | |
| TD：-40to23°C | ISO 11359-2 | 3E-05 cm/cm/°C | |
| MD：-- | ISO 11359-2 | 3E-05 cm/cm/°C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 276 °C |
| Linear coefficient of thermal expansion | TD：55to160°C | ISO 11359-2 | 7.7E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 254 °C |
Contact Us
Get App
Top