Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Unspecified ADDILENE H 490 S ADDIPLAST FRANCE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE H 490 S |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/1A | 3.5 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
| Charpy Notched Impact Strength | ISO 179/1eA | 3.5 kJ/m² |
| hardness | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE H 490 S |
|---|---|---|---|
| Shore hardness | 邵氏D | ISO 868 | 74 |
| Electrical performance | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE H 490 S |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 43 kV/mm | |
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm | |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 0 |
| Surface Resistivity | IEC 60093 | 1E+13 ohms |
| Mechanical properties | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE H 490 S |
|---|---|---|---|
| tensile strength | 断裂 | ISO 527-2 | 32.0 MPa |
| Tensile strain | 断裂 | ISO 527-2 | >100 % |
| Flexural modulus | ISO 178 | 1300 MPa |
| flammability | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE H 490 S |
|---|---|---|---|
| Hot filament ignition temperature | IEC 60695-2-13 | 960 °C | |
| Limiting Oxygen Index | ISO 4589-2 | 27 % | |
| UL flame retardant rating | 1.6mm | UL 94 | V-2 |
| physical property | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE H 490 S |
|---|---|---|---|
| density | ISO 1183/A | 0.940 g/cm³ | |
| melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 12 g/10min |
| Thermal performance | Test Condition | Test Method | ADDIPLAST FRANCE/ADDILENE H 490 S |
|---|---|---|---|
| vicat | ISO 306/A50 | 153 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/Af | 61.0 °C |
| melting temperature | ISO 3146 | 165to168 °C |
Contact Us
Get App
Top