plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM FG500MP NC010 DUPONT USA
Delrin®
Engine parts,Fitness equipment
Homopolymer,lubrication,Medium viscosity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodDUPONT USA/FG500MP NC010
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B163 °C
1.8MPa,UnannealedISO 75-2/A100 °C
Linear coefficient of thermal expansionTDISO 11359-21E-04 cm/cm/°C
MDISO 11359-21E-04 cm/cm/°C
Melting temperatureISO 11357-3178 °C
mechanical propertiesTest ConditionTest MethodDUPONT USA/FG500MP NC010
Bending modulusISO 1783200 Mpa
Nominal tensile fracture strainISO 527-217 %
Tensile modulusISO 527-23300 Mpa
Tensile strainYieldISO 527-212 %
tensile strengthYieldISO 527-270.0 Mpa
Physical propertiesTest ConditionTest MethodDUPONT USA/FG500MP NC010
melt mass-flow rate190°C/2.16kgISO 113313 g/10min
Shrinkage rateMDISO 294-41.9 %
TDISO 294-41.6 %
impact performanceTest ConditionTest MethodDUPONT USA/FG500MP NC010
Impact strength of simply supported beam without notch-30°CISO 179/1eU120 kJ/m²
23°CISO 179/1eU130 kJ/m²
flammabilityTest ConditionTest MethodDUPONT USA/FG500MP NC010
Burning rate1.00mmISO 3795<100 mm/min
Flammability level1.5mmIEC 60695-11-10,-20HB
FMVSS flammabilityFMVSS302B