Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
LDPE 959S STYRON US
--
For injection molding gra
Product trademark DOW
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | STYRON US/959S |
|---|---|---|---|
| DTUL | ASTM D-648 | 46.1 °C | |
| Environmental stress cracking resistance | ASTM D-1693 | 1.00 hr |
| Basic performance | Test Condition | Test Method | STYRON US/959S |
|---|---|---|---|
| density | ASTM D-792 | 0.921 g/cm | |
| melt mass-flow rate | ASTM D-1238 | 55 g/10min |
| Mechanical properties | Test Condition | Test Method | STYRON US/959S |
|---|---|---|---|
| hardness | ASTM D-2240 | 48 | |
| Tensile strength at break | ASTM D-638 | 6.21 Mpa | |
| elongation | 断裂 | ASTM D-638 | 58 % |
| elongation at yield | ASTM D-638 | 3.0 % | |
| Flexural modulus | ASTM D-790 | 331 Mpa | |
| Yield tensile strength | ASTM D-638 | 11.0 Mpa | |
| Tensile impact strength | ASTM D-1822 | 118 KJ/m |
| Thermal performance | Test Condition | Test Method | STYRON US/959S |
|---|---|---|---|
| vicat | ASTM D-1525 | 90.0 °C | |
| brittle temperature | ASTM D-746 | -20.0 °C | |
| Crystal point | ASTM D-3418 | 100 °C | |
| melting point | DSC | 110 °C |
Contact Us
Get App
Top