Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPO SE1GFN3-7001 SABIC INNOVATIVE SHANGHAI
NORYL™
medical care
Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/SE1GFN3-7001 |
---|---|---|---|
Rockwell hardness | L-Sale | ASTM D785 | 108 |
thermal performance | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/SE1GFN3-7001 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed,6.40mm | ASTM D648 | 135 °C |
0.45MPa,Unannealed,6.40mm | ASTM D648 | 141 °C | |
Linear coefficient of thermal expansion | MD:-40to95°C | ASTME831 | 2.5E-05 cm/cm/°C |
RTI Elec | UL 746 | 110 °C | |
RTI Imp | UL 746 | 105 °C | |
RTI Str | UL 746 | 110 °C |
mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/SE1GFN3-7001 |
---|---|---|---|
Bending modulus | 100mmSpan | ASTM D790 | 7790 Mpa |
bending strength | Yield,100mmSpan | ASTM D790 | 172 Mpa |
elongation | Break | ASTM D638 | 5.0 % |
tensile strength | Break | ASTM D638 | 121 Mpa |
Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/SE1GFN3-7001 |
---|---|---|---|
Arc resistance | ASTM D495 | PLC6 | |
Compared to the anti leakage trace index | CTI | UL 746 | PLC 3 |
Dielectric constant | 50Hz | ASTM D150 | 3.15 |
60Hz | ASTM D150 | 3.15 | |
Dielectric strength | 3.20mm,inOil | ASTM D149 | 21 KV/mm |
Dissipation factor | 60Hz | ASTM D150 | 2E-03 |
50Hz | ASTM D150 | 2E-03 | |
High arc combustion index | HAI | UL 746 | PLC 2 |
High voltage arc tracing rate | HVTR | UL 746 | PLC 4 |
Hot wire ignition | HWI | UL 746 | PLC 0 |
Physical properties | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/SE1GFN3-7001 |
---|---|---|---|
density | ASTM D792 | 1.31 g/cm³ | |
Shrinkage rate | MD:3.20mm | Internal Method | 0.10-0.40 % |
Water absorption rate | 24hr | ASTM D570 | 0.060 % |
impact performance | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/SE1GFN3-7001 |
---|---|---|---|
Impact strength of cantilever beam gap | 23°C | ASTM D256 | 120 J/m |
-40°C | ASTM D256 | 96 J/m |
flammability | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/SE1GFN3-7001 |
---|---|---|---|
Extreme Oxygen Index | ASTM D2863 | 36 % | |
UL flame retardant rating | 6.0mm | UL 94 | V-0 |
1.5mm | UL 94 | V-1 |