Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Epoxy Epoxies, Ect. 10-3002 Epoxies, Etc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Epoxies, Etc./Epoxies, Ect. 10-3002 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 210 J/m |
| Supplementary Information | Test Condition | Test Method | Epoxies, Etc./Epoxies, Ect. 10-3002 |
|---|---|---|---|
| operate temperature | -50.0-125 °C |
| Mechanical properties | Test Condition | Test Method | Epoxies, Etc./Epoxies, Ect. 10-3002 |
|---|---|---|---|
| bending strength | 352 MPa |
| thermosetting | Test Condition | Test Method | Epoxies, Etc./Epoxies, Ect. 10-3002 |
|---|---|---|---|
| Thermosetting mixed viscosity | 25°C | 70000 cP |
| Uncured Properties | Test Condition | Test Method | Epoxies, Etc./Epoxies, Ect. 10-3002 |
|---|---|---|---|
| Curing Time | 储存稳定性4(25°C) | 90 min | |
| MixRatiobyWeight(PBW) | PartB | 100 | |
| Curing Time | 93°C | 0.25to0.50 hr | |
| Color | Clear/Transparent | ||
| Viscosity | 25°C2 | 45 Pa·s | |
| density | 25°C2 | 0.958 g/cm³ | |
| Viscosity | 25°C3 | 12 Pa·s | |
| density | 25°C3 | 1.17 g/cm³ | |
| Curing Time | 66°C | 0.50to1.0 hr | |
| 23°C | 24 hr | ||
| MixRatiobyWeight(PBW) | PartA | 100 |
| Cured Properties | Test Condition | Test Method | Epoxies, Etc./Epoxies, Ect. 10-3002 |
|---|---|---|---|
| Dissipation Factor | 0.020 | ||
| dielectric strength | 22 kV/mm | ||
| Volume resistivity | 1.1E+15 ohms·cm | ||
| relative permittivity | 1kHz | 3.11 | |
| tensile strength | 72.4 MPa |
| Thermal performance | Test Condition | Test Method | Epoxies, Etc./Epoxies, Ect. 10-3002 |
|---|---|---|---|
| thermal conductivity | 0.43 W/m/K | ||
| Linear coefficient of thermal expansion | MD | 5E-05 cm/cm/°C |
Contact Us
Get App
Top