Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
DAP Wah Hong DAP WH-9100- BLK D Wah Hong Industrial Corp.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Wah Hong Industrial Corp./Wah Hong DAP WH-9100- BLK D |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 54 J/m |
| Mechanical properties | Test Condition | Test Method | Wah Hong Industrial Corp./Wah Hong DAP WH-9100- BLK D |
|---|---|---|---|
| Flexural modulus | ASTM D790 | 10800to11800 MPa | |
| bending strength | ASTM D790 | 108to118 MPa |
| Electrical performance | Test Condition | Test Method | Wah Hong Industrial Corp./Wah Hong DAP WH-9100- BLK D |
|---|---|---|---|
| dielectric strength | ASTM D149 | 29to32 kV/mm | |
| Volume resistivity | --2 | ASTM D257 | 1.0E+14到1.0E+15 ohms·cm |
| --3 | ASTM D257 | 1.0E+13到1.0E+14 ohms·cm | |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 0 |
| arc resistance | ASTM D495 | 190 sec |
| flammability | Test Condition | Test Method | Wah Hong Industrial Corp./Wah Hong DAP WH-9100- BLK D |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Wah Hong Industrial Corp./Wah Hong DAP WH-9100- BLK D |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.28to0.31 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | <0.10 % |
| density | ASTM D792 | 1.88 g/cm³ |
| Thermal performance | Test Condition | Test Method | Wah Hong Industrial Corp./Wah Hong DAP WH-9100- BLK D |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 270 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 3E-05 cm/cm/°C |
Contact Us
Get App
Top