Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 UNIPA® Rk Nytef Plastics, Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Nytef Plastics, Ltd./UNIPA® Rk |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 53 J/m |
| Electrical performance | Test Condition | Test Method | Nytef Plastics, Ltd./UNIPA® Rk |
|---|---|---|---|
| Dissipation Factor | 60Hz | ASTM D150 | 0.010 |
| Volume resistivity | ASTM D257 | 1E+15 ohms·cm | |
| dielectric strength | ASTM D149 | 14 kV/mm | |
| dielectric constant | 60MHz | ASTM D150 | 4.00 |
| 1MHz | ASTM D150 | 3.40 |
| Mechanical properties | Test Condition | Test Method | Nytef Plastics, Ltd./UNIPA® Rk |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 4.0to5.0 % |
| tensile strength | ASTM D638 | 102 MPa | |
| Flexural modulus | ASTM D790 | 4240 MPa | |
| coefficient of friction | ASTM D1894 | 0.30 | |
| bending strength | ASTM D790 | 131 MPa |
| flammability | Test Condition | Test Method | Nytef Plastics, Ltd./UNIPA® Rk |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| physical property | Test Condition | Test Method | Nytef Plastics, Ltd./UNIPA® Rk |
|---|---|---|---|
| Water absorption rate | 饱和 | ASTM D570 | 8.0 % |
| 24hr | ASTM D570 | 1.0 % | |
| density | ASTM D792 | 1.18 g/cm³ |
| Thermal performance | Test Condition | Test Method | Nytef Plastics, Ltd./UNIPA® Rk |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 232 °C |
| Continuous use temperature | 内部方法 | 98.9 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 9E-05 cm/cm/°C |
| melting temperature | ASTM D3418 | 262 °C |
Contact Us
Get App
Top