Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM Z3510 ASAHIKASEI SUZHOU
TENAC™-C
Electrical applications,Household daily necessities,Shell,Application in the automotive field,Engine parts,Engineering accessories
High impact resistance,Medium viscosity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | ASAHIKASEI SUZHOU/Z3510 |
---|---|---|---|
Rockwell hardness | M-Scale | ASTM D785 | 78 |
thermal performance | Test Condition | Test Method | ASAHIKASEI SUZHOU/Z3510 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 110 °C |
0.45MPa,Unannealed | ISO 75-2/B | 156 °C | |
1.8MPa,Unannealed | ISO 75-2/A | 95.0 °C | |
0.45MPa,Unannealed | ASTM D648 | 158 °C | |
Linear coefficient of thermal expansion | MD | ASTMD696 | 1E-04 cm/cm/°C |
specific heat | 1470 J/kg/°C | ||
thermal conductivity | 0.23 W/m/K |
mechanical properties | Test Condition | Test Method | ASAHIKASEI SUZHOU/Z3510 |
---|---|---|---|
Bending modulus | -- | ISO 178 | 2400 Mpa |
-- | ASTM D790 | 2450 Mpa | |
bending strength | ASTM D790 | 88.0 Mpa | |
elongation | Break | ASTMD638 | 40 % |
Taber abraser | ASTM D1044 | 14.0 mg | |
Tensile modulus | ISO 527-2 | 2500 Mpa | |
tensile strength | -- | ASTM D638 | 62.0 Mpa |
Yield | ISO 527-2 | 62.0 Mpa |
Electrical performance | Test Condition | Test Method | ASAHIKASEI SUZHOU/Z3510 |
---|---|---|---|
Arc resistance | ASTM D495 | 250 sec | |
Dielectric constant | 23°C,1MHz | ASTM D150 | 3.90 |
Dielectric strength | ASTM D149 | 19 KV/mm | |
Dissipation factor | 23°C,1MHz | ASTM D150 | 8E-03 |
Surface resistivity | ASTM D257 | 1.0E+16-1.0E+17 ohms | |
Volume resistivity | 23°C | ASTM D257 | 1.0E+15-1.0E+16 ohms·cm |
Physical properties | Test Condition | Test Method | ASAHIKASEI SUZHOU/Z3510 |
---|---|---|---|
melt mass-flow rate | 190°C/2.16kg | ISO 1133 | 2.8 g/10min |
Shrinkage rate | MD | Internal Method | 1.6-2.0 % |
Water absorption rate | 23°C,24hr,50%RH | ASTM D570 | 0.20 % |