Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC Plaslube® PC / ABS 830 Techmer Polymer Modifiers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® PC / ABS 830 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 750 J/m |
| hardness | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® PC / ABS 830 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 115 |
| Mechanical properties | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® PC / ABS 830 |
|---|---|---|---|
| elongation | 屈服 | ASTM D638 | 130 % |
| Flexural modulus | ASTM D790 | 2340 MPa | |
| tensile strength | 屈服 | ASTM D638 | 53.1 MPa |
| bending strength | ASTM D790 | 82.7 MPa |
| flammability | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® PC / ABS 830 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| physical property | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® PC / ABS 830 |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.10 % |
| melt mass-flow rate | 230°C/3.8kg | ASTM D1238 | 5.5 g/10min |
| density | ASTM D792 | 1.13 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.70 % |
| Thermal performance | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® PC / ABS 830 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 110 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 7.4E-05 cm/cm/°C |
Contact Us
Get App
Top