Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+TPU II 90A DSM Additive Manufacturing
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | DSM Additive Manufacturing/II 90A |
|---|---|---|---|
| Shore hardness | 邵氏A | ASTM D2240 | 92 |
| Mechanical properties | Test Condition | Test Method | DSM Additive Manufacturing/II 90A |
|---|---|---|---|
| tensile strength | 100%应变 | ASTM D1708 | 13.2 MPa |
| Flexural modulus | ASTM D790 | 45.1 MPa | |
| coefficient of friction | 与自身-动态 | ASTM D1894 | 0.43 |
| tensile strength | 300%应变 | ASTM D1708 | 44.9 MPa |
| bending strength | 5.0%应变 | ASTM D790 | 2.16 MPa |
| tensile strength | 50%应变 | ASTM D1708 | 9.36 MPa |
| 断裂 | ASTM D1708 | 59.4 MPa | |
| elongation | 断裂 | ASTM D1708 | 390 % |
| Electrical performance | Test Condition | Test Method | DSM Additive Manufacturing/II 90A |
|---|---|---|---|
| dielectric constant | 60Hz | ASTM D150 | 3.97 |
| dielectric strength | ASTM D149 | 17 kV/mm |
| physical property | Test Condition | Test Method | DSM Additive Manufacturing/II 90A |
|---|---|---|---|
| Water absorption rate | 饱和 | ASTM D750 | 0.72 % |
| Shrinkage rate | MD | ASTM D955 | 0.83to2.7 % |
| melt mass-flow rate | ASTM D1238 | 18 g/10min | |
| average molecular weight | 内部方法 | 262000 Mw |
| Thermal performance | Test Condition | Test Method | DSM Additive Manufacturing/II 90A |
|---|---|---|---|
| vicat | ASTM D1525 | 94.7 °C | |
| Glass Transition Temperature | ASTME1356 | -2.00 °C | |
| melting temperature | ASTME1356 | 177 °C |
Contact Us
Get App
Top