Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEI 2110EPR-7301 SABIC INNOVATIVE US
ULTEM™
Medical packaging、Bottle cap
Low viscosity、enhance、Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | SABIC INNOVATIVE US/2110EPR-7301 |
|---|---|---|---|
| RTI | UL 746 | 170 °C | |
| Deflection Temperature Under Load? | 1.8 MPa, 未退火, 6.40 mm | ASTM D648 | 207 °C |
| RTI Imp | UL 746 | 170 °C | |
| RTI Elec | UL 746 | 170 °C |
| Injection | Test Condition | Test Method | SABIC INNOVATIVE US/2110EPR-7301 |
|---|---|---|---|
| Middle Temperature | 340 到 400 °C | ||
| Drying Time | 4.0 到 6.0 hr | ||
| Suggested Shot Size | 40 到 60 % | ||
| Drying Temperature | 150 °C | ||
| Mold Temperature | 135 到 165 °C | ||
| Vent Depth | 0.025 到 0.076 mm | ||
| Suggested Max Moisture | 0.020 % | ||
| Processing (Melt) Temp | 350 到 400 °C | ||
| Rear Temperature | 330 到 400 °C | ||
| Nozzle Temperature | 345 到 400 °C | ||
| Front Temperature | 345 到 400 °C | ||
| Back Pressure | 0.300 到 0.700 Mpa | ||
| Screw Speed | 40 到 70 rpm |
| Physical | Test Condition | Test Method | SABIC INNOVATIVE US/2110EPR-7301 |
|---|---|---|---|
| Melt Mass-Flow Rate | 337°C/6.6 kg | ASTM D1238 | 11 g/10 min |
| Mechanical Properties | Test Condition | Test Method | SABIC INNOVATIVE US/2110EPR-7301 |
|---|---|---|---|
| Flexural Strength | 断裂, 100 mm 跨距 | ASTM D790 | 199 Mpa |
| Tensile Modulus | ASTM D638 | 4610 Mpa | |
| Tensile Strength | 屈服 | ASTM D638 | 114 Mpa |
| Flexural Modulus | 100 mm 跨距 | ASTM D790 | 5240 Mpa |
| Tensile Strength | 断裂 | ASTM D638 | 115 Mpa |
| Tensile Elongation | 断裂 | ASTM D638 | 6.0 % |
| Impact Properties | Test Condition | Test Method | SABIC INNOVATIVE US/2110EPR-7301 |
|---|---|---|---|
| Reverse Notch Izod Impact | 3.20 mm | ASTM D256 | 400 J/m |
| Flammability | Test Condition | Test Method | SABIC INNOVATIVE US/2110EPR-7301 |
|---|---|---|---|
| UL flame retardant rating | 0.41 mm | UL 94 | V-0 |
| 1.9 mm | UL 94 | 5VA |
| Electrical Properties | Test Condition | Test Method | SABIC INNOVATIVE US/2110EPR-7301 |
|---|---|---|---|
| Hot-wire Ignition | UL 746 | PLC 1 | |
| Arc Resistance | ASTM D495 | PLC 6 | |
| Comparative Tracking Index | UL 746 | PLC 4 | |
| High Amp Arc Ignition | UL 746 | PLC 4 | |
| High Voltage Arc Tracking Rate | UL 746 | PLC 2 |
Contact Us
Get App
Top